github.com/sandeepmistry/arduino-nRF5 issues | Ecosyste.ms: OpenCollective

Add a generic variant for the NRF52840DK board

needs-coffee opened this pull request 2 months ago

Creates the NRF52840DK variant

needs-coffee opened this pull request 2 months ago

Avoid custom MCU definition being redefined as NRF52832

needs-coffee opened this pull request 2 months ago

nRF52833 2nd UART

msfujino opened this issue 3 months ago

nRF52810 programing

WhoTookMyNicks opened this issue 6 months ago

analog: nrf52: Add acquisition time configuration function

msalau opened this pull request 7 months ago

Support for Nice!Nano V2 Nordic nRF52840

astrolemonade opened this issue 9 months ago

Issue flashing soft device on nRF52832 module - Error: Could not find MEM-AP to control the core

EmikVayts opened this issue 10 months ago

corrects A3 from pin 3 to pin 18(C18), adds A7 as pin 16(C16)

fabianhugo opened this pull request 11 months ago

Inquiry about PDM Support and Libraries for MP34DT05TR on nrf52832

xpix opened this issue 12 months ago

Unable to use P0.00

endlessmind opened this issue 12 months ago

adds Calliope mini V3 to the library

fabianhugo opened this pull request about 1 year ago

Cannot upload with "Error: unable to find CMSIS-DAP device" on Windows 11

msfujino opened this issue about 1 year ago

Flash softdevice jar does not work - HTTP error 403

rogerclarkmelbourne opened this issue about 1 year ago

SPI won't work on nRF52 SDK + Adafruit SHARP Memory Display (144x168 pixels)

vtpgit opened this issue about 1 year ago

Successful upload but no output on nRF52810

samlbakr opened this issue over 1 year ago

Missing 'NRF5 Flash Softdevice' entry in tools menu

Flavelius opened this issue over 1 year ago

Only serial works - micro:bit v2.21

WallysFerreira opened this issue over 1 year ago

Can flash Adafruit Nrf52832 instead arduino core ble?

Girum opened this issue over 1 year ago

Simple blink works but BLE not

beckmx opened this issue over 1 year ago

Add support for Adafruit BLE UART Friend

mo-pyy opened this pull request over 1 year ago

Error: jtag status contains invalid mode value - communication failure

dejavu1987 opened this issue over 1 year ago

nRF52832 P0.00 and P0.01 cannot be used as GPIO

mdellen opened this issue almost 2 years ago

How to using AES in NRF51.

NgHieuPickon opened this issue almost 2 years ago

Connecting NRF52840 chip

bbuster2 opened this issue almost 2 years ago

Problem on nrf51.cpu: target state: halted

beckmx opened this issue almost 2 years ago

stdint.h Missing

bbburnaby opened this issue almost 2 years ago

added ST-Link/V2-1 aka ST-Link On-Board as stlinkob

so2akt opened this pull request almost 2 years ago

Cant bind with HID samples on a nrf51822 16Kb.

aguaviva opened this issue about 2 years ago

nRF52832 - issue with BLE UART (NUS)

armtech opened this issue about 2 years ago

Error while flashing SoftDevice... Server returned HTTP response code: 403

Teddyz opened this issue about 2 years ago

arm-none-eabi-g++: no such file or directory

krisstakos opened this issue about 2 years ago

High power consumption in sleep mode with i2c and interrupt

muhdRiz07 opened this issue about 2 years ago

nrf52840 :Second uart

creatron opened this issue about 2 years ago

STlink-V2 issue with Waveshare

akshaych92 opened this issue over 2 years ago

Txd on microbit v2

tcpipchip opened this issue over 2 years ago

CI: Add GitHub Actions workflow to build blinky with all variants.

carlosperate opened this pull request over 2 years ago

Fix Arduino.h `portOutputRegister()` and `portModeRegister()`

carlosperate opened this pull request over 2 years ago

Conflict with LCD and BLE

LiveRock opened this issue over 2 years ago

nrf51822 UART BLE

sahilsawant031996 opened this issue over 2 years ago

nRF SDK - DMT Test Mode with Arduino Code

ThomasAtBBTF opened this issue over 2 years ago

micro:bit V2 bluetooth support

maxgerhardt opened this issue over 2 years ago

nrf51822 generic board dose nor advertise Bluetooth at all

AlirezaDadrass opened this issue over 2 years ago

micro:bit v2 no valid JTAG interface configured error on Macbook Air M1

BereketTesfa opened this issue over 2 years ago

nRF52833 to use NRF_P1 problem

mrespin opened this issue over 2 years ago

unused parameter

MikeJaras opened this issue almost 3 years ago

<SOLVED> Wiring Problem --- Selecting Low Frequency Clock to either Synthesized or RC does now work with boards that do not have a LF crystal fitted

drmpf opened this issue almost 3 years ago

Pin mapping Analog pins for Generic nRF52 (nRF52832) appears to be incorrect

drmpf opened this issue almost 3 years ago

Broken link in doc: https://github.com/sandeepmistry/arduino-nRF5

mik00 opened this issue almost 3 years ago

Target-Download to Calliope mini Rev2 via OpenOCD does not work

supavisor opened this issue almost 3 years ago

How i can dev in NRF52810?

vanhcm20 opened this issue almost 3 years ago

Porting the latest nRF5 SDK to the Arduino platform

TauqirH opened this issue about 3 years ago

Customized OTA DFU on the NRF52 SOCs

TauqirH opened this issue about 3 years ago

Timer Example Problem

microderm opened this issue about 3 years ago

How can I create a custom board variant for NRF 52840 and load the Arduino bootloader on this chip?

onderbedirhan opened this issue about 3 years ago

Porting adafruit_littleFS

TrailBee47 opened this issue over 3 years ago

wiring_analog_nRF52.c bug

il300 opened this issue over 3 years ago

TwoWire::begin pin configuration incorrect with alternate pins

evaninventhys opened this issue over 3 years ago

NRF52840

tcpipchip opened this issue over 3 years ago

Adding a S112/S113 SoftDevice to Core

DirtyEngineer opened this issue over 3 years ago

Which SoftwareSerial library should I use

jake653 opened this issue over 3 years ago

how can I get the HEX file from Arduino for microbit

radinParsaei opened this issue over 3 years ago

[Question] Saving value to storage

jLynx opened this issue over 3 years ago

Device not broadcasting after successful verification

ab3lson opened this issue almost 4 years ago

reset pin

smartboxchannel opened this pull request almost 4 years ago

reset pin

smartboxchannel opened this pull request almost 4 years ago

nrf52 stop showing after being paired

ajakmyslisz opened this issue almost 4 years ago

Uart RXD

tcpipchip opened this issue almost 4 years ago

CalliopeMini: Move SCK to a real pin

functionpointer opened this pull request almost 4 years ago

Looking for the right bootloader

sigalabs opened this issue almost 4 years ago

attachInterrupt with pin "LOGO" doesn't work (Micro:bit V2)

Polyphe opened this issue almost 4 years ago

Can't programm nrf52832 with Jlink.

lanket opened this issue almost 4 years ago

i2c_scanner hangs on nRF52832

pvonmoradi opened this issue almost 4 years ago

Add support for Generic NRF52805

nikolac opened this pull request about 4 years ago

Is nRF52805 supported? If not, how can I help?

nikolac opened this issue about 4 years ago

setPins undeclared ?

Entretoize opened this issue about 4 years ago

Update to nRF MDK 8.37.0, add nRF52833 and BBC Micro:bit v2 support, secondary Wire1 interface support

sandeepmistry opened this pull request about 4 years ago

Error while flashing SoftDevice. java.nio.file.AccessDeniedException

Entretoize opened this issue about 4 years ago

error compiling

ARKopp opened this issue about 4 years ago

BBC microbit v2

jhmaloney opened this pull request about 4 years ago

nRF52840 MDK USB Dongle support

mischief opened this issue about 4 years ago

Support for micro:bit v2

jhmaloney opened this issue about 4 years ago

Trouble loading sandeep mistry bootloader for nRF52832 to Nordic based PCB with J-Link mine EDU

JLOCK1776 opened this issue about 4 years ago

Invalid port mapping in pulse.c pulseIn

sanyi opened this issue over 4 years ago

Error while flashing SoftDevice. when flashing RAK itracker v3 board in s132

alexjolly28 opened this issue almost 5 years ago

Core development can build just fine, but not able to find openocd

ekawahyu opened this issue almost 5 years ago

sketches not starting on bare-bone MCU

lyakh opened this issue almost 5 years ago

FreeRTOS or multi-tasking equivalent?

marquesn opened this issue almost 5 years ago

Is there a way to request battery using this library?

AnthonyAchoy opened this issue almost 5 years ago

nRF52840 module (E73) pinout reference for Arduino IDE pins?

mrdc opened this issue about 5 years ago

Arduino using thr nRF5 as BT via serial, like HC-05?

Flavio-da-Brescia opened this issue about 5 years ago

Define a generic API for Timer2

pmalasp opened this pull request about 5 years ago

Makes Wire and SPI compatible out of the box.

quent8192 opened this pull request over 5 years ago

Enables GPIO low accuracy interrupt

jeanmatthieud opened this pull request over 5 years ago

USB MIDI?

amowry opened this issue over 5 years ago

Black Magic Probe - Cannot access memory at address 0x1c84c

vladkozlov69 opened this issue over 5 years ago

Update OpenOCD to allow removing nRF52 programming protection

drmpf opened this issue almost 6 years ago

added tools.openocd.upload.network_pattern for ArduinoOTA

JAndrassy opened this pull request about 6 years ago

v0.7 Release

dlabun opened this issue about 6 years ago

attachInterrupt() not working -> stops BLE Advertise

ericlangel opened this issue over 6 years ago