github.com/Enraged-Rabbit-Community/ERCF_v2 issues

Thumper-Blocks Software Configuration Documentation

dmxkov opened this issue 11 days ago

Help failure of fiber retraction

sima35 opened this issue 18 days ago

Filamentalist 100mm Base has holes in the wrong position

nikpcenicni opened this issue 23 days ago

SB_G2E_Rear_Body_EBB missing hole

awickham10 opened this issue about 1 month ago

[Usermod] Thumper Block with integrated Runout Sensor

kieraneglin opened this pull request about 2 months ago

Filament and tube generate static electricity then cause mmu board been shock and disconnect. (Potential damage)

willzhai55 opened this issue about 2 months ago

V6 Hotend Filametrix hotend body causing interference with modified CW2 body

halfbro opened this issue 2 months ago

Fixed document link

Swamp-Ig opened this pull request 2 months ago

some fix tube connector and accel levers

v6cl opened this pull request 2 months ago

Tube connector and accel STL FIX

v6cl opened this pull request 2 months ago

Update README.md

SNR-Tech-Bytes opened this pull request 3 months ago

Tube connector add options.

v6cl opened this pull request 3 months ago

Filamentalist - left/right supports missing hole for baseplate mounting screw

system-dsn opened this issue 3 months ago

Happy Hare+ERCF v2 Install on Nebula pad Ender 3 v3 KE? is it possible?

SPYKE357 opened this issue 3 months ago

Recommended_Options/ERCT_Buffer/README.md has invalid files linked (AKA Learn to not reference documentation without copying it locally)

KittenRaee opened this issue 3 months ago

[Sugestion] Coupler Block with 4.5 mm steel ball

klone52 opened this issue 3 months ago

Idea for filament cutting to be in the ecf itself

SamueldaCostaAraujoNunes opened this issue 3 months ago

Filamentalist rear load option interferes with full spools.

miguelangel-nubla opened this issue 3 months ago

Filamentalist_F1 mod supports under 2020 profile

lpeiro61 opened this issue 4 months ago

F1 mod v0.2

v6cl opened this pull request 4 months ago

[Filamentalist] Manual and BOM inconsistent on the screw size

mwiercinski opened this issue 4 months ago

Missing tool head cable cover file for filamatrix tool head

3D-Magic opened this issue 4 months ago

[Filamentalist] FAQ documentation refers to unavailable links in rc2 branch

lordofhyphens opened this issue 4 months ago

Un-supported stl files?

hcker2000 opened this issue 4 months ago

Motor_Arm_NEMA14,dosent fit aluminum 80 tooth gear

Mark-Zina opened this issue 4 months ago

Update README.md for ERF_Filament_Cutter

kargeor opened this pull request 4 months ago

recommend option Filamentalist rewinder user mod : f1 "add some images"

v6cl opened this pull request 5 months ago

Upload filamentalist f1 mod

v6cl opened this pull request 5 months ago

[Suggestion]: Add pre-gate sensor enabled filament path blocks to user mods

k1-801 opened this issue 5 months ago

[Suggestion]: Filamentalist - 606 bearing option for tensioner arm

k1-801 opened this issue 5 months ago

CAD for ERF filament cutter depressor mount

ksteddom opened this issue 5 months ago

RC2: Move electronics box back into recommended mods

kwalters3 opened this issue 5 months ago

Documentation Correction: ERCF V2 Manual

AustinTylerDean opened this issue 5 months ago

filename is wrong - Filament_Blocks/Tag_Plates stl file names has wrong [a] for plate for missing [a] for digits

ntchris opened this issue 6 months ago

master : add Mellow-MMU board support like BTT-MMB for ERCT

qqqwqk opened this pull request 6 months ago

RC2 : add Mellow-MMU board support like BTT-MMB for ERCT

qqqwqk opened this pull request 6 months ago

[Question] Thumper Blocks

mochoandre opened this issue 6 months ago

Documentation - SUB-BOM Info Missing or Incorrect

sparticvs opened this issue 6 months ago

Update ball size recommandation for the toolhead sensor

onde2rock opened this pull request 6 months ago

Ender 3 with Sprite Extruder Pro

RobinDadswell opened this issue 7 months ago

Tag plates for ERCT

alidaf opened this issue 7 months ago

request to support larger and stronger springy servo

ntchris opened this issue 7 months ago

ERCF V2 Manual - Typo

Ledzpg opened this issue 7 months ago

Modded buffer wheel spacers

adolfotregosa opened this pull request 7 months ago

Update README.md

iamrans0m00 opened this pull request 7 months ago

Documentation of 180 degree option

saeugetier opened this issue 7 months ago

ERCT issues with RC2 Coupler_Block_Base and with arm hexagon holes.

adolfotregosa opened this issue 8 months ago

Documentation: washers have hex drive

strayr opened this issue 8 months ago

Wrong hole size on Gear Box Front

gabber130779 opened this issue 8 months ago

Introduction / Print Guidelines - update first print file name ERCF_Calibration_Tool.stl to Calib_Test.stl

tiwipewo opened this issue 8 months ago

ERCT Microswitch wiring instructions

digitalirony opened this issue 8 months ago

Incorrect gearbox sub-assembly part count in manual

mikesmitty opened this issue 9 months ago

please provide an CAD step file

fabse-hack opened this issue 9 months ago

Slicer Settings to print the parts

dushyantahuja opened this issue 9 months ago

Doumentation update needed

Saikedo opened this issue 9 months ago

FR - Galileo 2 Extruder with (2) filament sensors

77arkus76ohr opened this issue 9 months ago

Filament Block Base built in supports are fragile

ressu opened this issue 9 months ago

Selector motor mount doesn’t fit motor

igiannakas opened this issue 9 months ago

Added User_mod: Holey Gate Plates

3DCreationsByChad opened this pull request 9 months ago

Missing Holes in [a]_Support_Arm_Endcap_No_Electronic_Box.stl in ERCT_Buffer

greyhound3 opened this issue 9 months ago

Clear instructions (file list) for Upgrade from 1.1 to 2

jonathanalevi opened this issue 9 months ago

Servo Arm Slippage - Possible Solution

CaptainFoul opened this issue 9 months ago

ERCT 180 degree coupler issue

bartoszwas opened this issue 10 months ago

MMB Can 1.1 does not fit

TravisWilder opened this issue 10 months ago

Makerpanda certification

Fragmon opened this pull request 10 months ago

Duplicates in printed parts tracker

Belstrekkie opened this issue 10 months ago

Filament_Path_xN.stl has 6 non-mainfold edges

relder opened this issue 10 months ago

ERCFv2 BOM - Number of filament blocks

alidaf opened this issue 10 months ago

LED Wiring overall

orotecluc opened this issue 10 months ago

[ERF] Added Support for RapidoV2 HF and UHF

BrokenAutomap opened this pull request 10 months ago

Additional View for End Stop Wiring

Tuckpolo opened this issue 10 months ago

Match Selector Parts for Matched Material Shrinkage

Tuckpolo opened this issue 10 months ago

[ERCT] Missing Support Material on 180 Coupler Block

EllaFoxo opened this issue 11 months ago

Fix recursive steps in Setup and Calibration document.

timmit99 opened this pull request 11 months ago

Toolhead Sensor only for ERF wrong STL

eprouty opened this issue 11 months ago

Apron LED Documentation

eprouty opened this issue 11 months ago

Can you make hotend for rapido v2

mole6999 opened this issue 11 months ago

[ERF] File management...again

IRTrail opened this pull request 11 months ago

ERCT Overhanging Rabbit

3DPrintDemon opened this issue 11 months ago

[documentation] selector assembly steps

shiftingtech opened this issue 11 months ago

ERCT - MMB Cover noses breaking

Surion79 opened this issue 11 months ago

Suggest adding more clearance to the gear box to route motor wires through

alexstone opened this issue 11 months ago

request for a file to put a list of parts

StalkFPV opened this issue 11 months ago

File management in ERF Cutter

IRTrail opened this pull request 11 months ago

Integrated support is not printed correctly

mboo83 opened this issue 11 months ago

G2E Toolhead and Entry Sensor STL on 2_Toolhead_Sensor

gralves2 opened this issue 11 months ago

Replacement for the steelballs in the ERCT_Buffer Coupler_Blocks

hummerdash opened this pull request 11 months ago

PartsTracker incorrect printed count

mikeytdisco opened this issue 11 months ago

Parts Tracker Filamatrix cutter cell data validation values invalid

mikeytdisco opened this issue 11 months ago

gearbox microswitch wiring local mmu

sharpner opened this issue 11 months ago

[User Mod] Adjustable ECAS Filament Blocks

EllaFoxo opened this pull request 11 months ago

ERCF Manual: Cotton tail Arms wrong screws

DianosOdd opened this issue 12 months ago

Support Arm Rabbit Logo Fix

eprouty opened this pull request 12 months ago

[User Mod] Tube Management Guides

EllaFoxo opened this pull request 12 months ago

[User Mod] No Bypass End Block

EllaFoxo opened this pull request 12 months ago

ERCFv2 Manual: No reference for 2 part Tophats screws

iwm911 opened this issue 12 months ago

ERCFv2 Manual: Page 40, Motor Arm Microfit specified for local MCU (Should be for remote)

iwm911 opened this issue 12 months ago

[Toolhead Sensors] Add Kapton tape to BOM

EllaFoxo opened this issue 12 months ago

ERCFv2 Manual: page 99 inconsistent screw specified

akempster opened this issue 12 months ago

Toolhead Sensor Part Mismatch

EllaFoxo opened this issue 12 months ago

Ecosyste.ms: OpenCollective

github.com/Enraged-Rabbit-Community/ERCF_v2