github.com/OpenZWave/qt-openzwave issues | Ecosyste.ms: OpenCollective

Exited with Status Code 254

mabrochu-helpox opened this issue over 3 years ago

Duplicate mqtt-client-id's

yodalived opened this issue almost 4 years ago

HealthCheck for standalone image

sadmin91 opened this issue almost 4 years ago

Unknown: type=4f50, id=3034, manufacturer id=0039

ex-nerd opened this issue almost 4 years ago

ozwdaemon stuck after restart with 100% cpu load

oeiber opened this issue almost 4 years ago

Add healthcheck to docker in case $USB_PATH goes away

jamesgol opened this pull request almost 4 years ago

Wrong device state in HA due to QoS 0

roel00 opened this issue about 4 years ago

Suddenly most devices went: Unknown: type=0000, id=0000

1iveowl opened this issue about 4 years ago

Document support for secrets in README

JacobSnyder opened this pull request about 4 years ago

OZW (qt-openzwave docker) stops updating MQTT - yet keep alive continues

mkmer opened this issue about 4 years ago

Question about docker usage

rwa opened this issue about 4 years ago

Wrong level report - Philio Technology Corp PAN08-1

elad-bar opened this issue about 4 years ago

Fan Entity Control through OpenZWave - "Low" setting sends nothing through MQTT / "High" level sends nothing through MQTT and level of Fan Controller is not updating back to HomeAssistant

sstratoti opened this issue about 4 years ago

Simple code fix for consistency

Olen opened this pull request about 4 years ago

Battery draining after restart

GeertvanHorrik opened this issue about 4 years ago

Does not reply within MQTT keep-alive

jmgiaever opened this issue about 4 years ago

USB Device not Recognized

GoingOffRoading opened this issue about 4 years ago

HS-WS200+ support scenes

miguelarios opened this issue about 4 years ago

Docker container exits if connection to MQTT server fails for any reason

garethhowell opened this issue about 4 years ago

GoControl/Linear WA00Z-1 w/Home Assistant

majorsl opened this issue about 4 years ago

Ability to disable QVariant log messages

matejdro opened this issue about 4 years ago

Allow customizing ozwd-admin port

adamjernst opened this pull request about 4 years ago

Increase keepalive

Olen opened this pull request about 4 years ago

Remove AsleepNode

CerielRoland opened this issue about 4 years ago

Unable to use/apply network-key/encryption to device

jmgiaever opened this issue about 4 years ago

ID LOCK 150. Parameter

labaland opened this issue about 4 years ago

Ability to query list of associations for a given node

m3ki opened this issue about 4 years ago

remove extra slash

chrisdrackett opened this pull request about 4 years ago

Devolo Thermostat (Danfoss) crashes openzwave

ljmgd8 opened this issue over 4 years ago

correct the case for 'setvalue' MQTT documentation

yearski opened this pull request over 4 years ago

MQTT.md healnetwork missing parameter "doreturnroute"

yearski opened this issue over 4 years ago

Controller operations should support timeouts

kpine opened this issue over 4 years ago

Crash during startup v0.5.2

abmantis opened this issue over 4 years ago

Update MQTT.md

ghost opened this pull request over 4 years ago

SetPollInterval not working

broyuken opened this issue over 4 years ago

Fibaro FGS223 Double relay missing second instance

estyrke opened this issue over 4 years ago

[Deleted]

ghost opened this issue over 4 years ago

OZW will not publish partial updates to SwitchMultiLevel

matejdro opened this issue over 4 years ago

Deleting a Node does not remove the associated MQTT topic

blhoward2 opened this issue over 4 years ago

New lock codes show up in ozwadmin but not in MQTT until ozwdaemon restarted

adamurban opened this issue over 4 years ago

[FR] - Buttons at top should be buttons not menu items

jaburges opened this issue over 4 years ago

DANALOCK V3 CRASHING THE OpenZWave / qt-openzwave when using Danapad to unlock

elgeniskogen opened this issue over 4 years ago

Unable to start on Unraid (error 253)

bradsk88 opened this issue over 4 years ago

Add Leviton VRCS4 missing from manufacturer_specific.xml by referencing VRCZ4 xml.

blhoward2 opened this issue over 4 years ago

Unable to Connect to MQTT Server

marleyjaffe opened this issue over 4 years ago

[FR] - switches that are lights

jaburges opened this issue over 4 years ago

Add OZW_AUTH_KEY to documentation

erikced opened this pull request over 4 years ago

`AddNode` failing with timeout

michaelolson opened this issue over 4 years ago

Permission Errors

gregg098 opened this issue over 4 years ago

Vision ZM1701 log record is incorrect

danielbrunt57 opened this issue over 4 years ago

Crash when doing "removefailednode"

perosb opened this issue over 4 years ago

Replace Failed Node doesn't work.

DanielWinks opened this issue over 4 years ago

Node "data" missing from MQTT for all nodes apart from one

cannfoddr opened this issue over 4 years ago

GE and HomeSeer Dimmer unreliability with turning on and off

kylehendricks opened this issue over 4 years ago

ozwdaemon on rPi zero fails might be the platform

Jelmer-H opened this issue over 4 years ago

Dragon Tech PA-100 Appliance Module Control Problems

majorsl opened this issue over 4 years ago

Can't reset power meter because valueidkey is invalid

mew1033 opened this issue over 4 years ago

[ozw.library] [critical]: Error - Node: 0 ERROR: Not enough space in stream buffer

Madelaide opened this issue over 4 years ago

Add-on Crash Adding Kwikset Zwave Lock

Mdleal opened this issue over 4 years ago

fatal: unable to make dir

MTrab opened this issue over 4 years ago

Added missing parameter for healnetwork.

elahd opened this pull request over 4 years ago

Leviton switches sending hundreds of messages, won't toggle after latest update

sheepster-9k opened this issue over 4 years ago

OpenZWave not (always) reporting back status when binary switch toggled

petertq opened this issue over 4 years ago

Correctly set Button value types (#139)

kpine opened this pull request over 4 years ago

Releases instead of nightly builds?

balk77 opened this issue over 4 years ago

DESTDIR not honored during `make install`.

sofar opened this issue over 4 years ago

OZW Admin VNC window keeps closing

danielbrunt57 opened this issue over 4 years ago

MQTT client timeout

eriklindqvist opened this issue over 4 years ago

Buttons not being supported

Borcon opened this issue over 4 years ago

GE Z-Wave Motion Dimmer 26933 config parameter 8 setvalue resulting in 'Incorrect Field Type (Short) for "setvalue"'

DanielBaulig opened this issue over 4 years ago

Fibaro FGWD111 Walli Dimmer malfunction

simulot opened this issue over 4 years ago

RaZberry card on remote Pi not seen by OZW

danielbrunt57 opened this issue over 4 years ago

Add more detailed library and application versioning

kpine opened this issue over 4 years ago

ozwdaemon fails when previous file reaches 9.6MB

tcastberg opened this issue over 4 years ago

Prevent docker build layer cache invalidation

kpine opened this pull request over 4 years ago

Honeywell T6 Pro thermostat reports set points in celsius units

joshtbernstein opened this issue over 4 years ago

Stuck at "Waiting for the Controller to Enter AddNode Mode..."

MTrab opened this issue over 4 years ago

OpenZWave V0.5.1 addon crashes on start with warning "Bitset is Missing Position or Value Members, or Incorrect Types"

Madelaide opened this issue over 4 years ago

Expose precision of Decimal values

kpine opened this issue over 4 years ago

Inconsistent final event states when cancelling some commands

kpine opened this issue over 4 years ago

Improved startup behavior when MQTT broker is unavailable (#120)

kpine opened this pull request over 4 years ago

Node metadata is not published to MQTT after interview

kpine opened this issue over 4 years ago

ozw-admin segfault (Sig=11) on hassio vdi, intel

Madelaide opened this issue over 4 years ago

Persist ozw-admin settings (allinone image)

kpine opened this issue over 4 years ago

Non-zwave plus Jasco devices are not detecting physical events.

Petro31 opened this issue over 4 years ago

Implement SetChangeVerified API

kpine opened this issue over 4 years ago

Repeated crashes (std::out_of_range) after adding Dome Door / Window Sensor Pro

autopad opened this issue over 4 years ago

Is there a way to increase the VNC resolution of the host so more/all info fits on the screen?

poldim opened this issue over 4 years ago

Mouse doesn't show up when using novnc

mew1033 opened this issue over 4 years ago

ozw.daemon crash

l7s opened this issue over 4 years ago

Add stop function for Fibaro FGRM 222 roller shutter

balk77 opened this issue over 4 years ago

REQ: (re)store node names after restart

posixx opened this issue over 4 years ago

FR: Add Support for network attached USB stick

rbflurry opened this issue over 4 years ago

Docker image no longer building

kpine opened this issue over 4 years ago

Weird topic behavior after factory resetting a node

kpine opened this issue over 4 years ago

Add support for mTLS authentication and configurable clientId

jonesaws opened this issue almost 5 years ago

Add support for Basic command class

kpine opened this issue almost 5 years ago

Update startup script, dockerfile

erikced opened this pull request almost 5 years ago

Battery devices have stale information after a ozwdaemon restart

kpine opened this issue almost 5 years ago

Strip abi version from libQt5Core

erikced opened this pull request almost 5 years ago