Ecosyste.ms: OpenCollective

An open API service for software projects hosted on Open Collective.

github.com/HTTPArchive/legacy.httparchive.org

<<THIS REPOSITORY IS DEPRECATED>> The HTTP Archive provides information about website performance such as # of HTTP requests, use of gzip, and amount of JavaScript. This information is recorded over time revealing trends in how the Internet is performing. Built using Open Source software, the code and data are available to everyone allowing researchers large and small to work from a common base.
https://github.com/HTTPArchive/legacy.httparchive.org

rely on setting $gArchive in utils.inc

git-svn-id: http://httparchive.googlecode.com/svn/trunk@901 fc7d47d3-c008-acd5-f51f-d19787b8a02f

36a3acfa955ea5e7b93afabb40fef5fb39771294 authored over 12 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
use getParam() - duh

git-svn-id: http://httparchive.googlecode.com/svn/trunk@900 fc7d47d3-c008-acd5-f51f-d19787b8a02f

6b1607859426b51be8e423d65f3e060a02f02599 authored over 12 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
rely on setting $gArchive in utils.inc

git-svn-id: http://httparchive.googlecode.com/svn/trunk@899 fc7d47d3-c008-acd5-f51f-d19787b8a02f

a350bfd9953750656264ab42533cd58afeef1f1e authored over 12 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
Big change is getting $gArchive from the querystring. Add greater use of getParam(). Add $gArchive to queries so we can start using page table archive column as a way to do one-off runs.

git-svn-id: http://httparchive.googlecode.com/svn/trunk@898 fc7d47d3-c008-acd5-f51f-d19787b8a02f

9d6368ce3882a2a41c356986058a232e8cc96133 authored over 12 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
nit

git-svn-id: http://httparchive.googlecode.com/svn/trunk@897 fc7d47d3-c008-acd5-f51f-d19787b8a02f

6ee5be56e4ab92ec904ae72849fc9dc33d2cf737 authored over 12 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
this is taking a long time - reduce the number of results

git-svn-id: http://httparchive.googlecode.com/svn/trunk@896 fc7d47d3-c008-acd5-f51f-d19787b8a02f

d418f77df2ed4723588c1488e02523af508d66cb authored over 12 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
add some articles mentioning HA

git-svn-id: http://httparchive.googlecode.com/svn/trunk@895 fc7d47d3-c008-acd5-f51f-d19787b8a02f

4e60cef2bb96b17728a029b45e67a66cd416f878 authored over 12 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
Add $gArchive to queries so we can start using page table archive column as a way to do one-off runs.

git-svn-id: http://httparchive.googlecode.com/svn/trunk@894 fc7d47d3-c008-acd5-f51f-d19787b8a02f

9939f92764962e6cabf22e80c9aaecdceba3ac2a authored over 12 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
remove $gArchive - we set it in utils

git-svn-id: http://httparchive.googlecode.com/svn/trunk@893 fc7d47d3-c008-acd5-f51f-d19787b8a02f

ddb4d2fd1aaf7179a627363ed29b4dab8b66bd86 authored over 12 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
remove $gArchive - we set it in utils

git-svn-id: http://httparchive.googlecode.com/svn/trunk@892 fc7d47d3-c008-acd5-f51f-d19787b8a02f

8d853732db5215f2aaf952a72a3f1208a016aacc authored over 12 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
remove $gArchive - we set it in utils

git-svn-id: http://httparchive.googlecode.com/svn/trunk@891 fc7d47d3-c008-acd5-f51f-d19787b8a02f

41788a2dce367594c973b95973a116c7f639f35d authored over 12 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
Big change is setting the page $url based on the URL requested (instead of the $firstUrl found in the results). Added some comments about changes needed when gathered repeatView results.

git-svn-id: http://httparchive.googlecode.com/svn/trunk@890 fc7d47d3-c008-acd5-f51f-d19787b8a02f

efbac0c52b166052dd8a4758fcd580f7a3007606 authored over 12 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
add websites.php. Someone mentioned that we have to make sure search engine crawlers do not rank HA higher than the original site.

git-svn-id: http://httparchive.googlecode.com/svn/trunk@889 fc7d47d3-c008-acd5-f51f-d19787b8a02f

68595dc1273df265fa0fcd7b5d413ea533e381fa authored over 12 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
modify parseXMLResult to use firstView so we can easily change it to repeatView. better error handling for parseXMLResult. add some comments.

git-svn-id: http://httparchive.googlecode.com/svn/trunk@888 fc7d47d3-c008-acd5-f51f-d19787b8a02f

a48c6649039a9f52f2aa3f7f8080cb8ef4108ba1 authored over 12 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
major rewrite to support commandline parameters (read code for usage)

git-svn-id: http://httparchive.googlecode.com/svn/trunk@887 fc7d47d3-c008-acd5-f51f-d19787b8a02f

12901c88135c8070df8de42a76022bc9edb48920 authored over 12 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
add comment for $mv

git-svn-id: http://httparchive.googlecode.com/svn/trunk@886 fc7d47d3-c008-acd5-f51f-d19787b8a02f

d10622026476346e62b079be354531bb61ed44b3 authored over 12 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
add some spacing

git-svn-id: http://httparchive.googlecode.com/svn/trunk@885 fc7d47d3-c008-acd5-f51f-d19787b8a02f

0c40433110d0f698a48ad05de232b349dffd819e authored over 12 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
Now that we can specify a location when invoking batch_start.php, there is an issue with our lock files. It would be possible to launch TWO or more runs from this single directory if each had a different location (since location/device is part of the lockfilename). The points of contention for multiple runs are: a) the status table (since we clear out the table each time we launch a run); b) the batch.log (since we delete this file each time we start a job). Both of these points are based on current directory, so starting now we put the lock files in the current directory and do NOT use the $device in the filename. (Later I need to go back and remove the $device param from the function & callers.)

git-svn-id: http://httparchive.googlecode.com/svn/trunk@884 fc7d47d3-c008-acd5-f51f-d19787b8a02f

807bac203b6da0a7789772587a2474e4c9fa0d7d authored over 12 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
remove bottom border

git-svn-id: http://httparchive.googlecode.com/svn/trunk@883 fc7d47d3-c008-acd5-f51f-d19787b8a02f

2aa831485fcf05b8f3cee0e167bfb6aa8af83b9a authored over 12 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
We used to stop at the onload time, but there is no way to determine if new frame updates after the onload time are due to the interval being so long (1 second) or because of activity after the onload event (async requests, js, etc.). So we just follow the frame information from WPT and render the filmstrip in a similar way.

git-svn-id: http://httparchive.googlecode.com/svn/trunk@882 fc7d47d3-c008-acd5-f51f-d19787b8a02f

87b7fbc08ce8b8c9b680b6fec45502901b6ec718 authored over 12 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
add a gray border to mobile filmstrip thumbnails. change "changed" border from blank to gold.

git-svn-id: http://httparchive.googlecode.com/svn/trunk@881 fc7d47d3-c008-acd5-f51f-d19787b8a02f

458f3734b84c87aff1c9461e7e4686f8bdc43828 authored over 12 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
fix bug in filmstrip view for mobile where the "blank" screenshot was a broken image

git-svn-id: http://httparchive.googlecode.com/svn/trunk@880 fc7d47d3-c008-acd5-f51f-d19787b8a02f

b987c5fb6d769521b165df4ce8faffea0b9824b5 authored over 12 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
center thumbnail imags in filmstrip

git-svn-id: http://httparchive.googlecode.com/svn/trunk@879 fc7d47d3-c008-acd5-f51f-d19787b8a02f

35e419b4d180a88c0e4cb307e2ac78f592f1dbef authored over 12 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
increase to 200K

git-svn-id: http://httparchive.googlecode.com/svn/trunk@878 fc7d47d3-c008-acd5-f51f-d19787b8a02f

c09d97b06c2624a0baf42bdb96f1fb778a061d4a authored over 12 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
fix JS error with jQuery "$" race condition.

git-svn-id: http://httparchive.googlecode.com/svn/trunk@877 fc7d47d3-c008-acd5-f51f-d19787b8a02f

171cec3210703395cba05da373162f79899f6cbb authored over 12 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
avoid loading GA for private instances

git-svn-id: http://httparchive.googlecode.com/svn/trunk@876 fc7d47d3-c008-acd5-f51f-d19787b8a02f

4eb5a3effb74e813b6ff5fea2484d4a3bfb989cd authored over 12 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
move URL globals from utils.inc. add $gbPrivateInstance.

git-svn-id: http://httparchive.googlecode.com/svn/trunk@875 fc7d47d3-c008-acd5-f51f-d19787b8a02f

6bdc51c26f0ded7d037da2093acb6180b416749e authored over 12 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
modify for private instance: Move URL global vars to settings.inc. Avoid my specific "date range" settings. Avoid Top100 and Top1000 slices. Add isPrivateInstance function. Fix minor bug in doRowQuery.

git-svn-id: http://httparchive.googlecode.com/svn/trunk@874 fc7d47d3-c008-acd5-f51f-d19787b8a02f

76c50ef4dca694ae2b2d0f012fdb3719c1c3077b authored over 12 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
alter the output depending on whether we need HTML or just commandline

git-svn-id: http://httparchive.googlecode.com/svn/trunk@873 fc7d47d3-c008-acd5-f51f-d19787b8a02f

e2ab4d2d337c0521f43ccd5571dc5b6583b5a3ec authored over 12 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
make image hrefs relative

git-svn-id: http://httparchive.googlecode.com/svn/trunk@872 fc7d47d3-c008-acd5-f51f-d19787b8a02f

31fe93b5565cef2125109882cabcf95b9d779848 authored over 12 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
avoid unnecessary copying - esp. for private instances

git-svn-id: http://httparchive.googlecode.com/svn/trunk@871 fc7d47d3-c008-acd5-f51f-d19787b8a02f

19f1546c7fce21829de2402acd1089007814c569 authored over 12 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
update news. START collecting mentions.

git-svn-id: http://httparchive.googlecode.com/svn/trunk@870 fc7d47d3-c008-acd5-f51f-d19787b8a02f

7ce88023fc723159258c314a261febc5cc19ff03 authored over 12 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
fix bug 174: make interesting stats charts preserve querystring when clicking on charts

git-svn-id: http://httparchive.googlecode.com/svn/trunk@869 fc7d47d3-c008-acd5-f51f-d19787b8a02f

2a77a519f8b40a76317fa1d7d6d067310f0ee19a authored over 12 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
avoid warnings during mobile runs

git-svn-id: http://httparchive.googlecode.com/svn/trunk@868 fc7d47d3-c008-acd5-f51f-d19787b8a02f

95a4cb3583762df807684791a77ec2171d1a2588 authored over 12 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
add support for callbacks for async script loading. add a command queue for jquery to start unraveling script dependencies (but not used YET).

git-svn-id: http://httparchive.googlecode.com/svn/trunk@867 fc7d47d3-c008-acd5-f51f-d19787b8a02f

5491ad622da011813825e0ca50f4d3a113a91ca0 authored almost 13 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
remove jQuery dependencies

git-svn-id: http://httparchive.googlecode.com/svn/trunk@866 fc7d47d3-c008-acd5-f51f-d19787b8a02f

3c4a57ebf5fd81739c0806f91b5a728981f6885c authored almost 13 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
remove use of Google jsapi. Load jquery async. This makes rendering start 500-1000 ms sooner - yay!

git-svn-id: http://httparchive.googlecode.com/svn/trunk@865 fc7d47d3-c008-acd5-f51f-d19787b8a02f

5d5c25f08ac5cf7fd403bc5db29f6c0191b3de31 authored almost 13 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
allow to all for batch.log and batch_report.php

git-svn-id: http://httparchive.googlecode.com/svn/trunk@864 fc7d47d3-c008-acd5-f51f-d19787b8a02f

7eb78c40d78a12e9ebda10061b7df606ee4c7202 authored almost 13 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
make report better - show past DONE, auto-reload

git-svn-id: http://httparchive.googlecode.com/svn/trunk@863 fc7d47d3-c008-acd5-f51f-d19787b8a02f

d16cb3f40433722a31935211e65c8a90de155c48 authored almost 13 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
remove log file - this is created in cronjob

git-svn-id: http://httparchive.googlecode.com/svn/trunk@862 fc7d47d3-c008-acd5-f51f-d19787b8a02f

720a95124fa9f889f8f9e24860d8eeb368c725e1 authored almost 13 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
try to avoid a warning when Page Speed is missing. add time that run is DONE.

git-svn-id: http://httparchive.googlecode.com/svn/trunk@861 fc7d47d3-c008-acd5-f51f-d19787b8a02f

531afcfc31b6d5e0d98bf82ff2e58418d71968cd authored almost 13 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
add urlhash column to urls table. blacklist some sites. change device from "IE" to "IE8" - likely not referenced anywhere anyway.

git-svn-id: http://httparchive.googlecode.com/svn/trunk@860 fc7d47d3-c008-acd5-f51f-d19787b8a02f

3d146d3ea4d8a997b429a7717c8d8f0b5a211047 authored almost 13 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
do NOT use google jsapi - just load the script async manually

git-svn-id: http://httparchive.googlecode.com/svn/trunk@859 fc7d47d3-c008-acd5-f51f-d19787b8a02f

550ccf528f9c50dda5aeddb0fed0f9623ecebfa6 authored almost 13 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
add comments about why getTrendsDataForUrl is slow

git-svn-id: http://httparchive.googlecode.com/svn/trunk@858 fc7d47d3-c008-acd5-f51f-d19787b8a02f

0b7ea779a87a1439bf53b63f0596b12dd91ecc83 authored almost 13 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
add class=button

git-svn-id: http://httparchive.googlecode.com/svn/trunk@857 fc7d47d3-c008-acd5-f51f-d19787b8a02f

9b8b608136d8bbcbd5f7f31caf5317844dc0b49a authored almost 13 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
update urlhash when importing urls

git-svn-id: http://httparchive.googlecode.com/svn/trunk@856 fc7d47d3-c008-acd5-f51f-d19787b8a02f

81860282c9d46caaefa6e309290351f9af963b97 authored almost 13 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
use the new urlhash column - this saves 500-1000 ms

git-svn-id: http://httparchive.googlecode.com/svn/trunk@855 fc7d47d3-c008-acd5-f51f-d19787b8a02f

f13ed63097ca7fa94c7945e732dfd8f8a7b6bf94 authored almost 13 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
up it to 100K

git-svn-id: http://httparchive.googlecode.com/svn/trunk@854 fc7d47d3-c008-acd5-f51f-d19787b8a02f

c0e0040f99e7fa9da964ae992dab94016efcb518 authored almost 13 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
make the URL a link

git-svn-id: http://httparchive.googlecode.com/svn/trunk@853 fc7d47d3-c008-acd5-f51f-d19787b8a02f

f7aec7c78f0f85d62f1fe4738556edda69bb1d6c authored almost 13 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
up it to 75K URLs

git-svn-id: http://httparchive.googlecode.com/svn/trunk@852 fc7d47d3-c008-acd5-f51f-d19787b8a02f

bedf74ad72058fd086b8cddeb0ca8ee7599ea0de authored almost 13 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
We ran into a problem where there was ONE test that was stalled and so it caused the entire run to stop. Now we check for N (50) runs that are incomplete before bailing.

git-svn-id: http://httparchive.googlecode.com/svn/trunk@851 fc7d47d3-c008-acd5-f51f-d19787b8a02f

cdc39caa373f4e34da2f8838bd5197f9cec99205 authored almost 13 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
replaced by utils.inc

git-svn-id: http://httparchive.googlecode.com/svn/trunk@850 fc7d47d3-c008-acd5-f51f-d19787b8a02f

38e47795e369e2a289af9c4be766cbec8ea65a7d authored almost 13 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
replaced by ui.inc

git-svn-id: http://httparchive.googlecode.com/svn/trunk@849 fc7d47d3-c008-acd5-f51f-d19787b8a02f

cdbd405bb2c20c306213271512214753243f8252 authored almost 13 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
make runs.php work for mobile

git-svn-id: http://httparchive.googlecode.com/svn/trunk@848 fc7d47d3-c008-acd5-f51f-d19787b8a02f

09c4d8d42bf8ebd2ba76831ee2a433f7c7002d2d authored almost 13 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
remove suggestion to use "intersection"

git-svn-id: http://httparchive.googlecode.com/svn/trunk@847 fc7d47d3-c008-acd5-f51f-d19787b8a02f

74008ee640c6e73bdd449da74c997835842249a1 authored almost 13 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
make it so runs.php works in production - point to $gPagesTableDev (instead of $gPagesTable), remove link to viewsite.php

git-svn-id: http://httparchive.googlecode.com/svn/trunk@846 fc7d47d3-c008-acd5-f51f-d19787b8a02f

10835ccc4a1a551ab99bbcc3881573d137670caf authored almost 13 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
make it so runs.php works in production - point to $gPagesTableDev (instead of $gPagesTable), remove link to viewsite.php

git-svn-id: http://httparchive.googlecode.com/svn/trunk@845 fc7d47d3-c008-acd5-f51f-d19787b8a02f

0702300ac3e9318fb000dcde29bff2a4726f07db authored almost 13 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
add pageLabel() - given a pageid return the label

git-svn-id: http://httparchive.googlecode.com/svn/trunk@844 fc7d47d3-c008-acd5-f51f-d19787b8a02f

ed946c7915c8c309b6e3d970810bd0e8b62f8c60 authored almost 13 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
Add date range selectors.

git-svn-id: http://httparchive.googlecode.com/svn/trunk@843 fc7d47d3-c008-acd5-f51f-d19787b8a02f

76753dd9ccb0b4b316004a6afafd42702e2c3992 authored almost 13 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
Add date range selector to trending charts. Leverage $gDateRange for this. Special logic for selectArchiveLabel - do not use $gDateRange - ow people can never select outside the selected range. Add labelMinid() and labelMaxid() for date range.

git-svn-id: http://httparchive.googlecode.com/svn/trunk@842 fc7d47d3-c008-acd5-f51f-d19787b8a02f

8b4242ef071cb45fd551e6fe8da7d5bec8e63726 authored almost 13 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
Yay! Use class=image-link to avoid hover underline in image links.

git-svn-id: http://httparchive.googlecode.com/svn/trunk@841 fc7d47d3-c008-acd5-f51f-d19787b8a02f

8938d60c1ecad76c0e58c9726a947c306abe7662 authored almost 13 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
remove pointer cursor on form labels. improve look of buttons.

git-svn-id: http://httparchive.googlecode.com/svn/trunk@840 fc7d47d3-c008-acd5-f51f-d19787b8a02f

a6b7d3db5cc4551754b85fe5be998469a026ffd7 authored almost 13 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
avoid warning messages with better checking. fix bug by escaping single quotes when inserting URLs into mysql

git-svn-id: http://httparchive.googlecode.com/svn/trunk@839 fc7d47d3-c008-acd5-f51f-d19787b8a02f

2d138ee129c2801766a3d5beb8ba44bad3ce1b09 authored almost 13 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
avoid message in error.log by testing for ->frame

git-svn-id: http://httparchive.googlecode.com/svn/trunk@838 fc7d47d3-c008-acd5-f51f-d19787b8a02f

1f69beaea8bfca61d4e2d7d977619370c318cde6 authored almost 13 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
avoid error.log output by better testing isset($gPageid)

git-svn-id: http://httparchive.googlecode.com/svn/trunk@837 fc7d47d3-c008-acd5-f51f-d19787b8a02f

c15ff9ccf4e4c6c08c5a833a35096440067ed228 authored almost 13 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
add Torbit

git-svn-id: http://httparchive.googlecode.com/svn/trunk@836 fc7d47d3-c008-acd5-f51f-d19787b8a02f

5c054dbe318cec90b3fa542ab47ebe7e33aa3b76 authored almost 13 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
tweak a comment - no code changes

git-svn-id: http://httparchive.googlecode.com/svn/trunk@835 fc7d47d3-c008-acd5-f51f-d19787b8a02f

ff5895b24842a05791292af07f80f5d40340ff0d authored almost 13 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
add diffRuns() to compare the viewed run to the previous run

git-svn-id: http://httparchive.googlecode.com/svn/trunk@834 fc7d47d3-c008-acd5-f51f-d19787b8a02f

54bf6fcad185de6076f3e61854ef1894c989ec8a authored almost 13 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
add archiveLabelsForUrl(), crawledUrls(), crawledUrlsJS(), bigDiff(), and diffRuns(). This is mostly in support of runs.php which shows the most recent N websites that have been crawled with some info about how they changed (# of requsts, etc).

git-svn-id: http://httparchive.googlecode.com/svn/trunk@833 fc7d47d3-c008-acd5-f51f-d19787b8a02f

fe64b0334f61fcfbec5ffaca1c9f4f4d96842634 authored almost 13 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
add bug where we got smarter about skipping unnecessary additions, but needed to ALSO remove them from the changes table

git-svn-id: http://httparchive.googlecode.com/svn/trunk@832 fc7d47d3-c008-acd5-f51f-d19787b8a02f

bb35a5d6a4442e661b3c54bb2b3f70e406de09f9 authored almost 13 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
reinforce the need for harfiles-delme and har_to_pagespeed for mobile (for now)

git-svn-id: http://httparchive.googlecode.com/svn/trunk@831 fc7d47d3-c008-acd5-f51f-d19787b8a02f

12b248a203ca61665663b1239f7a594d06480916 authored almost 13 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
remove "-v" from the mysql undump instructions

git-svn-id: http://httparchive.googlecode.com/svn/trunk@830 fc7d47d3-c008-acd5-f51f-d19787b8a02f

9a5dc29bcd759b318cbd846caa634625274022a1 authored almost 13 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
add Torbit as a sponsor

git-svn-id: http://httparchive.googlecode.com/svn/trunk@829 fc7d47d3-c008-acd5-f51f-d19787b8a02f

a6420c748d139c00bd9ad502a0f2bedfe29a01e1 authored almost 13 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
logo from our new sponsor - Torbit!

git-svn-id: http://httparchive.googlecode.com/svn/trunk@828 fc7d47d3-c008-acd5-f51f-d19787b8a02f

c159caa5e037b30c46165b90f36cfcda63f11718 authored almost 13 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
make sure runs.js is parsed like PHP

git-svn-id: http://httparchive.googlecode.com/svn/trunk@827 fc7d47d3-c008-acd5-f51f-d19787b8a02f

47b4d90ab22eda82ea70890050f81e33e41050c8 authored almost 13 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
watch URLs as they get crawled. this is like a JSONP file but just plain JS. It is require_once into runs.php then requested dynamically thereafter for infinite scroll effect

git-svn-id: http://httparchive.googlecode.com/svn/trunk@826 fc7d47d3-c008-acd5-f51f-d19787b8a02f

2753baade10c52618b90c907ae6f71426f0e8770 authored almost 13 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
watch URLs as they get crawled

git-svn-id: http://httparchive.googlecode.com/svn/trunk@825 fc7d47d3-c008-acd5-f51f-d19787b8a02f

4994b8240367507fe084b2c8db8921921f988e59 authored almost 13 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
busy animated gif

git-svn-id: http://httparchive.googlecode.com/svn/trunk@824 fc7d47d3-c008-acd5-f51f-d19787b8a02f

eee3c8b5bb804a9ca079269af52367f93b92a60d authored almost 13 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
restrict access to the bulktest directory via HTTP

git-svn-id: http://httparchive.googlecode.com/svn/trunk@823 fc7d47d3-c008-acd5-f51f-d19787b8a02f

fc943840f51c884a8b0f87309320760946e14376 authored almost 13 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
improve logic so that if the user adds a URL that is ALREADY in the urls table we correctly bail or ask if other should be set to true

git-svn-id: http://httparchive.googlecode.com/svn/trunk@822 fc7d47d3-c008-acd5-f51f-d19787b8a02f

1b39b471f2cfceb254b6fe27d95260c7949ad200 authored almost 13 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
harden the code - was uncovered when pageid=undefined CGI param submitted

git-svn-id: http://httparchive.googlecode.com/svn/trunk@821 fc7d47d3-c008-acd5-f51f-d19787b8a02f

7159adf421ffb380c45d70098602e14629065018 authored almost 13 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
harden the code - was uncovered when pageid=undefined CGI param submitted

git-svn-id: http://httparchive.googlecode.com/svn/trunk@820 fc7d47d3-c008-acd5-f51f-d19787b8a02f

91b1acef5e7f9cc3476fc9db815597aa154da734 authored almost 13 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
add title mapping for bytesOther to avoid error in charts.inc line 191

git-svn-id: http://httparchive.googlecode.com/svn/trunk@819 fc7d47d3-c008-acd5-f51f-d19787b8a02f

d532177f593d3984b2c4a6709faeb49c1dada955 authored almost 13 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
add comment about harviewer

git-svn-id: http://httparchive.googlecode.com/svn/trunk@818 fc7d47d3-c008-acd5-f51f-d19787b8a02f

c2d1a4b04623b464a49683070bc7bf84e5ce3523 authored almost 13 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
add gunzip command example

git-svn-id: http://httparchive.googlecode.com/svn/trunk@817 fc7d47d3-c008-acd5-f51f-d19787b8a02f

2fe6040dd3a141e9ad18944ee1b9a696ea8cf954 authored almost 13 years ago by stevesoudersorg <stevesoudersorg@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
mitigate this complex nth-child rule - ugh

git-svn-id: http://httparchive.googlecode.com/svn/trunk@816 fc7d47d3-c008-acd5-f51f-d19787b8a02f

6770658c1d9417981c57929b2e7090e11b885777 authored almost 13 years ago by stevesoudersorg <stevesoudersorg@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
turn on numbers by default

git-svn-id: http://httparchive.googlecode.com/svn/trunk@815 fc7d47d3-c008-acd5-f51f-d19787b8a02f

8a1b3401b355726db5697b2720100d7185d44ab2 authored almost 13 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
compute missing stats

git-svn-id: http://httparchive.googlecode.com/svn/trunk@814 fc7d47d3-c008-acd5-f51f-d19787b8a02f

6ce52f8be7d1b23e4b4b74f77ddf0fff3b4ee46c authored almost 13 years ago by stevesoudersorg <stevesoudersorg@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
BUG! We need specific vars for the various "urls" tables so we can copy from dev to prod in copy.php.

git-svn-id: http://httparchive.googlecode.com/svn/trunk@813 fc7d47d3-c008-acd5-f51f-d19787b8a02f

6e037df5403ebe4778df06e80c03b63b1122b70c authored almost 13 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
BUG! We were deleting everything from the urlsdev table - yikes! Luckily, main source of "other" info is on my other server on dreamhost.

git-svn-id: http://httparchive.googlecode.com/svn/trunk@812 fc7d47d3-c008-acd5-f51f-d19787b8a02f

a6dfbc91c58c56714e9e8e87e5d0b3abaea4068c authored almost 13 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
remove old reportSummary0 func

git-svn-id: http://httparchive.googlecode.com/svn/trunk@811 fc7d47d3-c008-acd5-f51f-d19787b8a02f

48321bab7804bd3b108e80ceec15ee5791b43b4e authored almost 13 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
fix variable typo

git-svn-id: http://httparchive.googlecode.com/svn/trunk@810 fc7d47d3-c008-acd5-f51f-d19787b8a02f

3186f5082120ea69337e5d9f8de057800eded0f7 authored almost 13 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
fix obvious bug - ! getStatsData()

git-svn-id: http://httparchive.googlecode.com/svn/trunk@809 fc7d47d3-c008-acd5-f51f-d19787b8a02f

278acdfc126bd7c7ef52329f6d0837f15378a4c1 authored almost 13 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
mention 10K cap.

git-svn-id: http://httparchive.googlecode.com/svn/trunk@808 fc7d47d3-c008-acd5-f51f-d19787b8a02f

ee735195ac2cdc2ffb84274d7296856a3dde6106 authored almost 13 years ago by stevesoudersorg <stevesoudersorg@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
add text

git-svn-id: http://httparchive.googlecode.com/svn/trunk@807 fc7d47d3-c008-acd5-f51f-d19787b8a02f

102579f318316876afa3980131a8846433d65284 authored almost 13 years ago by stevesoudersorg <stevesoudersorg@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
generate a list of urls

git-svn-id: http://httparchive.googlecode.com/svn/trunk@806 fc7d47d3-c008-acd5-f51f-d19787b8a02f

1caf65690c0bf4bb8a4172207ef5a14457b48faa authored almost 13 years ago by stevesoudersorg <stevesoudersorg@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
on this server do application/x-httpd-php (remove the "5" at the end)

git-svn-id: http://httparchive.googlecode.com/svn/trunk@805 fc7d47d3-c008-acd5-f51f-d19787b8a02f

c1a49340e9429020631c57b104c1985e82f219e1 authored almost 13 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
use new gDesktopDir, gMobileDir, and gDevDir variables. remove pushbeta target.

git-svn-id: http://httparchive.googlecode.com/svn/trunk@804 fc7d47d3-c008-acd5-f51f-d19787b8a02f

2aae0bae1710199787a4620c782f51de83d5697c authored almost 13 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
use new $gDevDir and $gMobileDir vars

git-svn-id: http://httparchive.googlecode.com/svn/trunk@803 fc7d47d3-c008-acd5-f51f-d19787b8a02f

a3528d18dc1ac09fa8af923d2e02701949d3888f authored almost 13 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>
layout fix - put carriage return outside the if block

git-svn-id: http://httparchive.googlecode.com/svn/trunk@802 fc7d47d3-c008-acd5-f51f-d19787b8a02f

b4877719876c6f98fc6f107a26abe14e9fc61cc7 authored almost 13 years ago by [email protected] <[email protected]@fc7d47d3-c008-acd5-f51f-d19787b8a02f>