github.com/cncjs/cncjs issues | Ecosyste.ms: OpenCollective

Camera not working on macOS

pyrog opened this issue over 2 years ago

Connection via network 192.168.0.1 at port 23

ashokavarthanan opened this issue over 2 years ago

Ability to easily set an axis to half the current value

skasti opened this issue over 2 years ago

feat: add support for new Marlin 2.0 temperature report format

cheton opened this pull request over 2 years ago

Feed speed not match to grbl

AuBeTeX opened this issue over 2 years ago

$g loop?

otoyasan opened this issue over 2 years ago

Memory Leak

gururise opened this issue over 2 years ago

Install Guide Amendment

SaKiEQ opened this issue over 2 years ago

Window does not exist on visible screen.

Taruuk opened this issue over 2 years ago

feat: display the G-code line of certain M commands (e.g. M0/M1/M6/...) in the toast notification

cheton opened this pull request over 2 years ago

Overruns after switching to Big Sur OS

hareandmoon opened this issue over 2 years ago

Grbl: Fix for missing alarm state for non `<Alarm|...>` lines (like soft limits)

Billiam opened this pull request over 2 years ago

fix: fix wrong `pre-push` hook in `package.json`

Billiam opened this pull request over 2 years ago

Unwanted G10 L2 P1

AnTeBiOss opened this issue over 2 years ago

[feature request] GCODE filter / preprocessor

risacher opened this issue over 2 years ago

Comments on M0/M6 command not working in gcode

wb9tpg opened this issue over 2 years ago

Jog does not function: Marlin

rflulling opened this issue over 2 years ago

Extreme difficulty trying to install on Mint

jlawton11 opened this issue over 2 years ago

Windows Desktop App Does Not Start

Yarkinco opened this issue almost 3 years ago

feat(Marlin): report current position for all supported axes (X|Y|Z|A|B|C|E)

cheton opened this pull request almost 3 years ago

[Feature request] Warn before starting a Gcode that has no M3/M4

dwery opened this issue almost 3 years ago

Jog distance + and - seems to not work in app desktop

LoicLac opened this issue almost 3 years ago

CNCjs stops during job without error

fragsalat opened this issue almost 3 years ago

Update the Raspberry Pi Setup Guide

mathojojo opened this issue almost 3 years ago

Log

alemori opened this issue almost 3 years ago

"sign in" required for cncjs

NanookMacy opened this issue almost 3 years ago

Error response from daemon: manifest for cncjs/cncjs:latest not found: manifest unknown: manifest unknown

luisleonardo opened this issue almost 3 years ago

[feature request] Standard web socket implementation

dwery opened this issue almost 3 years ago

New to CNCjs and having some questions.

Durahl opened this issue almost 3 years ago

Doesn't work select port from JSON in Webui menu v1.9.23

urpylka opened this issue almost 3 years ago

Cannot create new marcos. Could be centered around save function.

Taruuk opened this issue about 3 years ago

TinyG with ShuttleXpress: clear queue when zone=0

Sil3ntLight opened this pull request about 3 years ago

No Execution Access To XPro V5 Widgets Even With Successful Connection Through Com Port

mschreib-il opened this issue about 3 years ago

Has this project been abandoned? Can the maintainers hand off control to active devs?

Domush opened this issue about 3 years ago

No welcome message, no reset, but working with UGS and Lightburn

wildfang opened this issue over 3 years ago

Propagate line comments in GRBL M0/M1/M6 commands to UI dialog

colincross opened this pull request over 3 years ago

Xpro V5, Grbl, CNCJS

celebie opened this issue over 3 years ago

Incorrect GCode While Probing with Marlin

CorruptName opened this issue over 3 years ago

FFserver no longer part of FFmpeg for RSTP streaming

holterb opened this issue over 3 years ago

Uploading large files >40 MB

slimline33 opened this issue about 4 years ago

HTTPS support

antonok-edm opened this issue about 4 years ago

Find out which endstop is being triggered?

Di3mex opened this issue over 4 years ago

Feature Request: Configurable Displayed Decimal Places for X, Y, and Z axes

aeleus opened this issue over 4 years ago

Return as-loaded gcode in gcode:load event

mmdoogie opened this pull request over 4 years ago

Support for message display from g-code comments

mmdoogie opened this pull request over 4 years ago

E Axis showing in Axes Widget with no option to remove

ciscomonkey opened this issue over 4 years ago

Patch 1 - run Macro Now update

dlarue opened this pull request over 4 years ago

Enable keyboard jogging whenever machine is idle

skendrot opened this issue over 4 years ago

Soft limits: Alarm state not triggered until reset

Billiam opened this issue over 4 years ago

Add event triggers to M0, M1, and M6 commands

carlos-sarmiento opened this pull request over 4 years ago

serialport: Is a directory

AlexandrParkhomenko opened this issue almost 5 years ago

jog not working on marlin

ameisso opened this issue almost 5 years ago

Manual input from keyboard for distance and feed rate

JPluess opened this issue almost 5 years ago

Calling macro from inside a macro

imwhocodes opened this issue almost 5 years ago

Machine Coordinates Not Updating in DRO

swpaxton66 opened this issue about 5 years ago

Fatal Error - Allocation Failed

JensAChristensen opened this issue over 5 years ago

Add a Grbl jogCancel command

colincross opened this pull request over 5 years ago

Authentication error

SVANNER opened this issue over 5 years ago

Node.js Installation Issues on Pi Zero

calumkenny opened this issue over 5 years ago

show gcode operation number and command in gcode widget

Raffa2s opened this issue over 5 years ago

Feature Request, custom text in M0 / M1 dialogues

bensuffolk opened this issue over 5 years ago

Run macros from pendant

grindel opened this issue about 6 years ago

CNCjs seems to fall asleep

eciramella opened this issue about 6 years ago

A-Axis does not report degrees.

toddmitchell opened this issue about 6 years ago

support for (msg ...)?

rkoe opened this issue over 6 years ago

New feature for lathe

alkabal opened this issue about 7 years ago

File Management

andrewismoody opened this issue almost 8 years ago

Eagle BRD import

MoonshineSG opened this issue about 8 years ago

Autostart

slimline33 opened this issue over 8 years ago

Autolevel function like in bCNC.

mano1979 opened this issue almost 9 years ago