Ecosyste.ms: OpenCollective

An open API service for software projects hosted on Open Collective.

github.com/BiancoRoyal/node-red-contrib-modbus

maintained by PLUS for Node-RED - https://plus4nodered.com
https://github.com/BiancoRoyal/node-red-contrib-modbus

Error: Port Not Open

JorgeAlberto91MS opened this issue over 2 years ago
Modbus-Response-Filter doesn't work

Kortenbach opened this issue over 2 years ago
Codesys-CSV-To-IO example not working

Kortenbach opened this issue over 2 years ago
Modbus RTU write and read

SP-Mushrooms opened this issue over 2 years ago
Output descriptions updated

hoegge opened this pull request over 2 years ago
Output descriptions are "wrong"

hoegge opened this issue over 2 years ago
"Error: UnitId is valid from msg or node" using 0 as UnitID with TCP

Kudhoh opened this issue almost 3 years ago
"Modbus Failure On State sending" warn due to timeouts

Killerloop2 opened this issue almost 3 years ago
MODBUS-Flex-Getter-Node FSM state errors intermittently

AustinEcowerks opened this issue almost 3 years ago
updating node-red-contrib-modbus 5.21.0 to 5.21.2 fails

Galapalos opened this issue almost 3 years ago
Modbus RTU connection

AlexSanderSabino opened this issue almost 3 years ago
Modbus ASCII Serial not working

GrtVHecke opened this issue almost 3 years ago
Modbus-Flex-Getter skips reading remaining devices on the bus after timeout error on device with lowest ID.

anykeymeister opened this issue almost 3 years ago
Problems with Modbus reconnection.

carflomi opened this issue almost 3 years ago
Status change not recognized by status node

awoSYS opened this issue about 3 years ago
Reading an address most often returns wrong value (0x00)

J4nsen opened this issue over 3 years ago
Version 6.x with NodeJS v18.x

biancode opened this issue over 3 years ago
Feature proposal: add before_tx and after_tx events to modbus-client - I will develop and submit PR

Ozzard opened this issue over 3 years ago
Modebus-Flex-Getter Node stops working every few hours - "initialize" Reopened

rucksman opened this issue almost 4 years ago
Modbus connection of SMA inverter throws error: "Client Not Ready To Read At State init"

robsloetjes opened this issue almost 4 years ago
FC43 / 14 (0x2B / 0x0E) Read Device Identification not supported

GrtVHecke opened this issue almost 4 years ago
Using environment variables for connection parameter in modbus client configuration

flodan opened this issue almost 4 years ago
Client unable to reconnect after Modbus Server goes offline and back online

MountainKing91 opened this issue almost 4 years ago
Act as a Slave in a Serial RS485 System

Ion3 opened this issue almost 4 years ago
Node-Red Uncaught Exception due Modbus Server node.

JorgeAlberto91MS opened this issue about 4 years ago
Bug after restart of Modbus-flex-server with active modbus-tcp connection

tadzil opened this issue about 4 years ago
Allow receive data length bigger than expected

E-NINA opened this issue over 4 years ago
Support for RTU “server”

rusirius84 opened this issue over 4 years ago
Introduction for contributors

biancode opened this issue over 4 years ago
Issue with multiple modbus rtu slaves

joearkay opened this issue about 5 years ago
Modbus TCP Server trigger on write

obstler42 opened this issue almost 6 years ago
Modbus RTU slave/server?

ornithophile opened this issue almost 6 years ago
Modbus serial RTS support

Aleshus opened this issue about 6 years ago
New connection Modbus RTU over TCP

nokautai opened this issue almost 8 years ago