Ecosyste.ms: OpenCollective

An open API service for software projects hosted on Open Collective.

The Network UPS Tools project

The Network UPS Tools project delivers a common protocol and tooling for interaction with power devices (UPSes, ePDUs and such), as portable FOSS.
Collective - Host: opensource - https://opencollective.com/networkupstools - Website: https://networkupstools.org/ - Code: https://github.com/networkupstools/nut

Smart UPS snmp-ups - delayed shutdown (reboot)

github.com/networkupstools/nut - LudekH2 opened this issue over 1 year ago
tools/gitlog2changelog.py.in: update TextWrapper settings to not break up file paths

github.com/networkupstools/nut - jimklimov opened this pull request over 1 year ago
Revise and import patches applied by ALT Linux

github.com/networkupstools/nut - jimklimov opened this issue over 1 year ago
Generate GitHub issue/PR links when rendering `NEWS` and `UPGRADING` files with short hash-number references

github.com/networkupstools/nut - jimklimov opened this issue over 1 year ago
two notifytypes together?

github.com/networkupstools/nut - GustelDE opened this issue over 1 year ago
Bump all driver versions before 2.8.1 release

github.com/networkupstools/nut - jimklimov opened this issue over 1 year ago
RFE: Tackle late shutdown wait to reboot if not powered-off by kernel modules

github.com/networkupstools/nut - jimklimov opened this issue over 1 year ago
TOTHINK: In git snapshot rebuilds, suffix NUT version with number of commits since release

github.com/networkupstools/nut - jimklimov opened this issue over 1 year ago
Add an option for blazer_usb and nutdrv_qx to enforce 102-byte buffer

github.com/networkupstools/nut - jimklimov opened this issue over 1 year ago
Bus 001 Device 004: ID 0001:0000 Fry's Electronics

github.com/networkupstools/nut - ilker-aktuna opened this issue over 1 year ago
Documentation - ADD New compatibility - CyberPower AVRG750LCD

github.com/networkupstools/nut - Minituff opened this issue over 1 year ago
Some small enhancements on gitlog2changelog.py

github.com/networkupstools/nut - xdelaruelle opened this pull request over 1 year ago
docs/developers.txt: update notes for IDE (specifically NetBeans on Windows) setup

github.com/networkupstools/nut - jimklimov opened this pull request over 1 year ago
[HCL] SVC PTL-3K-LCD supported by nutdrv_qx

github.com/networkupstools/nut - Energoblock opened this issue over 1 year ago
immediate LOW BATTERY after power failure (ups.status: LB)

github.com/networkupstools/nut - cyayon opened this issue over 1 year ago
apcsmart(-old): do_capabilities: nument (-1) or entlen (3) out of range

github.com/networkupstools/nut - richardtector opened this issue over 1 year ago
Documentation - ADD New compatibility in the documentation

github.com/networkupstools/nut - Gsyltc opened this issue over 1 year ago
Update sockdebug.txt

github.com/networkupstools/nut - jimklimov opened this pull request over 1 year ago
Port `time_elapsed()` from `adelsystem_cbi.c` to `common.{c,h}`

github.com/networkupstools/nut - jimklimov opened this issue over 1 year ago
Revise work with `struct timeval` to not rely on signedness of `tv_sec`/`tv_usec`

github.com/networkupstools/nut - jimklimov opened this issue over 1 year ago
Optionally install `sockdebug`, provide a man page; fix `upsdrvquery` PING/PONG and timeout processing

github.com/networkupstools/nut - jimklimov opened this pull request over 1 year ago
Setting up NUT and starter options

github.com/networkupstools/nut - SheepDomination opened this issue over 1 year ago
Battery switch?

github.com/networkupstools/nut - ohuu opened this issue over 1 year ago
man usbhid-ups misunderstanding

github.com/networkupstools/nut - cypa opened this issue over 1 year ago
EAST EA-850U

github.com/networkupstools/nut - CrewingTop opened this issue over 1 year ago
Some follow-up to new driver commands

github.com/networkupstools/nut - jimklimov opened this pull request over 1 year ago
Adjust timeout for `driver.reload*` operations to match driver loop delay and then some

github.com/networkupstools/nut - jimklimov opened this issue over 1 year ago
Allow `upsdrvquery_oneshot()` to accept caller's timeout

github.com/networkupstools/nut - jimklimov opened this issue over 1 year ago
Add support for TRACKING to (NO)BROADCAST on driver-upsd socket protocol

github.com/networkupstools/nut - jimklimov opened this issue over 1 year ago
Complete exit-code passing in `upsdrvctl -c driver.reload-or-error` command

github.com/networkupstools/nut - jimklimov opened this issue over 1 year ago
Extend driver data dump (requested over socket protocol without `upsd`) with printout by caller

github.com/networkupstools/nut - jimklimov opened this issue over 1 year ago
Eaton 9E2000I unknown device and ups model

github.com/networkupstools/nut - masterwishx opened this issue over 1 year ago
Extend `nut-driver-enumerator` to use `INSTCMD driver.reload-or-error`

github.com/networkupstools/nut - jimklimov opened this issue over 1 year ago
Extend `drivername -k` operation to try `INSTCMD driver.killpower` first, if possible

github.com/networkupstools/nut - jimklimov opened this issue over 1 year ago
Teach `upsdrvctl` and drivers to talk socket protocol to their other selves

github.com/networkupstools/nut - jimklimov opened this pull request over 1 year ago
dummy-ups port=... setting does not accept a path (WIN32 MSYS2 MinGWx64 at least)

github.com/networkupstools/nut - jimklimov opened this issue over 1 year ago
Extend driver-server socket protocol with verdicts

github.com/networkupstools/nut - jimklimov opened this issue over 1 year ago
[HCL] CyberPower GX1500U supported by `usbhid-ups$CP1500AVRLCD`

github.com/networkupstools/nut - A9G-Data-Droid opened this issue over 1 year ago
Extend server-driver socket protocol capabilities

github.com/networkupstools/nut - jimklimov opened this pull request over 1 year ago
Support (optionally?) driver `forceshutdown` via signal and/or socket protocol (without upsd)

github.com/networkupstools/nut - jimklimov opened this issue over 1 year ago
Complete the driver `reload` and `dump` functionality for WIN32 builds

github.com/networkupstools/nut - jimklimov opened this issue over 1 year ago
Introduce `NUT_DEBUG_LEVEL` envvar support for default setting

github.com/networkupstools/nut - jimklimov opened this issue over 1 year ago
Explore additional communications with driver by Unix socket (and Windows pipe?)

github.com/networkupstools/nut - jimklimov opened this issue over 1 year ago
Configuring NUT server on APC SMT750IC more sensors

github.com/networkupstools/nut - platini76 opened this issue over 1 year ago
Support signals (reload, dump...) in `upsdrvctl`, handle CLI `-c CMD` for drivers and upsdrvctl

github.com/networkupstools/nut - jimklimov opened this pull request over 1 year ago
Acquisition failed with daisychain epdu G3 with sensors

github.com/networkupstools/nut - ericclappier-eaton opened this pull request over 1 year ago
[TO REMOVE] Acquisition failed with daisychain epdu G3 with sensors

github.com/networkupstools/nut - ericclappier-eaton opened this pull request over 1 year ago
Revise use of `VAR_SENSITIVE` and other minor issues in new GPIO drivers

github.com/networkupstools/nut - jimklimov opened this pull request over 1 year ago
`upsd` does not honour `NUT_STATEPATH` envvar if there is a `STATEPATH` line in `upsd.conf`

github.com/networkupstools/nut - jimklimov opened this issue over 1 year ago
Want a way to dump driver state at run-time

github.com/networkupstools/nut - jimklimov opened this issue over 1 year ago
Driver `reload` - basic support

github.com/networkupstools/nut - jimklimov opened this pull request over 1 year ago
Investigate systemd dependency settings so NUT daemons stop late in shutdown

github.com/networkupstools/nut - jimklimov opened this issue over 1 year ago
Support `reload` operation for drivers (like we have for `upsd` and `upsmon`), at least to change `debug_min` setting

github.com/networkupstools/nut - jimklimov opened this issue over 1 year ago
5E 850i USB support

github.com/networkupstools/nut - Proche72 opened this issue almost 2 years ago
Setting input.transfer.high/low fails on CP1500PFCLCD but reports OK

github.com/networkupstools/nut - dacarson opened this issue almost 2 years ago
Update FAQ about enabling obsolete SSL modes

github.com/networkupstools/nut - jimklimov opened this issue almost 2 years ago
Report working: GreenCell PowerProof 600VA

github.com/networkupstools/nut - marciopamplona opened this issue almost 2 years ago
Incorrect data from the **riello_usb** driver

github.com/networkupstools/nut - shgubar opened this issue almost 2 years ago
Revise use of VAR_SENSITIVE with recent GPIO drivers

github.com/networkupstools/nut - jimklimov opened this issue almost 2 years ago
drivers/main.c: storeval() should honour VAR_SENSITIVE and not publish its default/override values

github.com/networkupstools/nut - jimklimov opened this issue almost 2 years ago
APC Back-UPS RS 1000MS 30 Sec Proxmox Shutdown

github.com/networkupstools/nut - chriseivert opened this issue almost 2 years ago
APC Smart UPS 1000 SUA communication problem

github.com/networkupstools/nut - VoiletDragon opened this issue almost 2 years ago
Cross build on i386 to armv7

github.com/networkupstools/nut - idabsent opened this issue almost 2 years ago
[HCL] PowerShield PSCRT2000 supported by nutdrv_qx

github.com/networkupstools/nut - AusKarlos87 opened this issue almost 2 years ago
FDs 0,1,2 are not always STDIO

github.com/networkupstools/nut - kkalganov opened this issue almost 2 years ago
Riello UPS compatibility list HCL

github.com/networkupstools/nut - mzampieri70 opened this issue almost 2 years ago
Optimize repetitive signal-sending via PID files, and differentiate PID file non-existance/non-readability from parsing problems from signal problems

github.com/networkupstools/nut - jimklimov opened this issue almost 2 years ago
[HCL] FSP/Fortron (Voltronic Power) Champ Tower 1K fully supported by nutdrv_qx

github.com/networkupstools/nut - linuxgemini opened this issue almost 2 years ago
Baytech Driver Requires Additional Outlet States

github.com/networkupstools/nut - iunderwood opened this issue almost 2 years ago
Smart UPS 1500(SMT1500RM2UC) does not report input.*, output.*, ups.load, or ups.realpower.nominal

github.com/networkupstools/nut - eamathw opened this issue almost 2 years ago
IPv4/ipv6 locahost conflict on the same UPS device ? really?

github.com/networkupstools/nut - cypa opened this issue almost 2 years ago
Fix some runtime issues seen on Windows

github.com/networkupstools/nut - jimklimov opened this pull request almost 2 years ago
upssched lacks a `-D` verbosity setting

github.com/networkupstools/nut - jimklimov opened this issue almost 2 years ago
upssched: let `UPSNAME@localhost` specs copied from upsmon config "just work"

github.com/networkupstools/nut - jimklimov opened this pull request almost 2 years ago
UPSSCHED doesn't work correct with multiple UPSs

github.com/networkupstools/nut - shgubar opened this issue almost 2 years ago
Salicru SPS 1500 AVD T supported by nutdrv_qx

github.com/networkupstools/nut - DEADSEC-SECURITY opened this issue almost 2 years ago
Debug `nut_report_config_flags()`: report version from AC_INIT vs. Git revision (if available) and compiler version

github.com/networkupstools/nut - jimklimov opened this pull request almost 2 years ago
Add Minuteman PRO1500RT2U to HCL & DDL

github.com/networkupstools/nut - jimklimov opened this issue almost 2 years ago
Network UPS Tools (NUT) "Can't connect to UPS" - Tripp Lite SMART500RT1U

github.com/networkupstools/nut - Jsalas424 opened this issue almost 2 years ago
huawei-ups2000: Data Stale with Endless "Register has a read failure. Retrying..."

github.com/networkupstools/nut - biergaizi opened this issue almost 2 years ago
vULTECH UPS1050VA-PRO HOMEASSISTANT

github.com/networkupstools/nut - Achy7 opened this issue almost 2 years ago
riello (or main?): refactor to `runtimecal` logic and configuration options

github.com/networkupstools/nut - jimklimov opened this issue almost 2 years ago
nut usbhid driver unable to find HID descriptors on interfaces other than interface 0

github.com/networkupstools/nut - x0ul opened this issue almost 2 years ago
Amazon Basic ABST600 supported by usbhid-ups

github.com/networkupstools/nut - BigGeorgeTx opened this issue almost 2 years ago
Energenie 1202 works, but fails to read ups.load%

github.com/networkupstools/nut - K1m0n opened this issue almost 2 years ago
Support sleep/hibernate integration (generally and with systemd in particular)

github.com/networkupstools/nut - jimklimov opened this issue almost 2 years ago
DOCS: Update developers.txt with hints for POSIX/WIN32 portable coding

github.com/networkupstools/nut - jimklimov opened this issue almost 2 years ago
Update nut-driver-enumerator.sh.in

github.com/networkupstools/nut - neilromig opened this pull request almost 2 years ago
grep issues

github.com/networkupstools/nut - neilromig opened this issue almost 2 years ago
[HCL] <APC> <BR1000MS> supported by <usbhid-ups>

github.com/networkupstools/nut - nwg5817 opened this issue almost 2 years ago
nut-scanner reports each connection type separately, sanity-check suffers

github.com/networkupstools/nut - jimklimov opened this issue almost 2 years ago
Provide sample init scripts and SMF/systemd units for `upslog`

github.com/networkupstools/nut - jimklimov opened this issue about 2 years ago
Extend nut-driver-enumerator (path, service) to handle upsd and upsmon

github.com/networkupstools/nut - jimklimov opened this issue about 2 years ago
Missing APC HID fields

github.com/networkupstools/nut - kolbai opened this issue about 2 years ago
ltdl consumers (nut-scanner, DMF): optional config file for library search paths

github.com/networkupstools/nut - jimklimov opened this issue about 2 years ago
wrong python installation when system has multiple versions

github.com/networkupstools/nut - gdt opened this issue about 2 years ago
daemons lack a -q (quiet flag)

github.com/networkupstools/nut - gdt opened this issue about 2 years ago
NUT losing connection when UPS switches to battery (usbhid)

github.com/networkupstools/nut - RobFisher opened this issue about 2 years ago
Looking at logs, `upsmon` `notify()` correlates with a new PID and program banner

github.com/networkupstools/nut - jimklimov opened this issue about 2 years ago
Idea for signals without PID files: use NUT protocol

github.com/networkupstools/nut - jimklimov opened this issue about 2 years ago