The Network UPS Tools project issues | Ecosyste.ms: OpenCollective

Fix some asciidoc cross-file links

github.com/networkupstools/nut - jimklimov opened this pull request 3 months ago

Add new driver for UPS supporting microlink protocol

github.com/networkupstools/nut - tom1422 opened this pull request 3 months ago

Update mge-hid.c: Added ups.beeper.status support for Masterpower MF-UPS650VA

github.com/networkupstools/nut - yonesmit opened this pull request 3 months ago

Added ups.beeper.status support for Masterpower MF-UPS650VA

github.com/networkupstools/nut - yonesmit opened this issue 3 months ago

EATON HID: add missing usages and paths (addon) - ABM Statuses

github.com/networkupstools/nut - masterwishx opened this pull request 3 months ago

Not supported UPS in NUT

github.com/networkupstools/nut - AppleCarmine opened this issue 3 months ago

introduce further handling and notifiers for ALARM status

github.com/networkupstools/nut - desertwitch opened this pull request 3 months ago

upsmon: ALARM status should be handled/handleable

github.com/networkupstools/nut - desertwitch opened this issue 3 months ago

Unable to Configure NUT using Cyberpower CP1500PFCLCDa UPS

github.com/networkupstools/nut - ccruiser opened this issue 3 months ago

No matching MIB found for sysOID '.1.3.6.1.4.1.318.1.3.27'

github.com/networkupstools/nut - rsiverd opened this issue 4 months ago

HCL/DDL bump 2024-10-01

github.com/networkupstools/nut - jimklimov opened this pull request 4 months ago

APC Back-UPS BX1200MI connection problems nut_libusb_get_report: Input/Output Error

github.com/networkupstools/nut - HyP3r- opened this issue 4 months ago

battery.charge.low is set to 100 for some reason. APC Back-UPS BGM1500B (Back-UPS Pro Gaming)

github.com/networkupstools/nut - Gon-97 opened this issue 4 months ago

Techly 1000VA, no battery and very few info

github.com/networkupstools/nut - urbaman opened this issue 4 months ago

[HCL] nJoy Keen 2000 supported by driver usbhid-ups

github.com/networkupstools/nut - giantplaceholder opened this issue 4 months ago

Support `LIBUSB_DEBUG=NUM` setting in `ups.conf`

github.com/networkupstools/nut - jimklimov opened this pull request 4 months ago

APC UPS Modbus support. Can't get it going.

github.com/networkupstools/nut - Plutoaurus opened this issue 4 months ago

FTY branch remerge from master/dev as of 2024-09-30

github.com/networkupstools/nut - jimklimov opened this pull request 4 months ago

usbhid-ups: Output voltage reading showing wrong voltage

github.com/networkupstools/nut - Aerol opened this issue 4 months ago

DEXP CEE-E1500VA

github.com/networkupstools/nut - big-vl opened this issue 4 months ago

nut_libusb_get_interrupt: Connection timed out on debug

github.com/networkupstools/nut - masterwishx opened this issue 4 months ago

upsrw commands get OK/Success but not change the variables

github.com/networkupstools/nut - masterwishx opened this issue 4 months ago

Mac OS X Sonoma / Sequoia on Mac Mini M2 - NUT 2.8.2 upsdrvctl / usbhid-ups fail to fork the driver as a daemon process.

github.com/networkupstools/nut - pjkerly opened this issue 4 months ago

add IMPULSE SNMP-card for 1-10kVA UPS in NUT

github.com/networkupstools/nut - seregega opened this pull request 4 months ago

Atlantis Land LinePower 1502 Pro UPS supported by usbhid-ups

github.com/networkupstools/nut - vin86 opened this issue 4 months ago

Work/2495

github.com/networkupstools/nut - masterwishx opened this pull request 4 months ago

nut-driver-enumerator generates systemd service that pulls deprecated systemd-udev-settle

github.com/networkupstools/nut - yuv420p10le opened this issue 4 months ago

EATON HID: add missing usages and paths - ECO Mode

github.com/networkupstools/nut - masterwishx opened this pull request 4 months ago

EATON HID: add missing usages and paths (initial)

github.com/networkupstools/nut - arnaudquette-eaton opened this pull request 4 months ago

Atlantis Land OnePower S80 supported by blazer_usb

github.com/networkupstools/nut - aleiepure opened this issue 4 months ago

CI: Jenkins wants perhaps too many permissions from users

github.com/networkupstools/nut - jimklimov opened this issue 4 months ago

Eaton ups recommendation

github.com/networkupstools/nut - erlendoyen opened this issue 4 months ago

[HCL] PowerWalker VFI 1000 AT supported by usbhid-ups

github.com/networkupstools/nut - evgeniy-harchenko opened this issue 4 months ago

clients/, common/, drivers/: refactor debug/log strerror to helper funcs

github.com/networkupstools/nut - desertwitch opened this pull request 4 months ago

docs/man/usbhid-ups.txt: add missing lowbatt argument

github.com/networkupstools/nut - desertwitch opened this pull request 4 months ago

Support for Liebert GXE 1-3KVA series

github.com/networkupstools/nut - goodspeed34 opened this pull request 4 months ago

drivers/main.c: upsdrv_banner(): keep NUT version near NUT project name…

github.com/networkupstools/nut - jimklimov opened this pull request 4 months ago

Driver data dumping mode seems to only emit data when debug is enabled

github.com/networkupstools/nut - jimklimov opened this issue 4 months ago

Port and use a variant of `nut_usb_get_string()` for `nut-scanner`

github.com/networkupstools/nut - jimklimov opened this pull request 5 months ago

docs/man/nut_usb_addvars.txt: make a NOTE of LibUSB specific debugging

github.com/networkupstools/nut - jimklimov opened this pull request 5 months ago

`Makefile.am`: `install-win-bundle-thirdparty` DLL check: cover `libexecdir`

github.com/networkupstools/nut - jimklimov opened this pull request 5 months ago

docs: finalize re-licensing of `scripts/installer` …

github.com/networkupstools/nut - jimklimov opened this pull request 5 months ago

A wrong `usb_config_index` (1) caused a segfault with libusb-0.1 builds (libusb1 is okay)

github.com/networkupstools/nut - jimklimov opened this issue 5 months ago

Restricted Eaton Software License

github.com/networkupstools/nut - xTeixeira opened this issue 5 months ago

Add missing values for ECO Mode Eaton

github.com/networkupstools/nut - masterwishx opened this pull request 5 months ago

Eaton UPS with SNMP not changing to LB ups.status on low battery

github.com/networkupstools/nut - Chris3773 opened this issue 5 months ago

Add man page for `clone-outlet` driver

github.com/networkupstools/nut - jimklimov opened this pull request 5 months ago

[Support] Epyc ION UPS (lsusb listed as cyber power CP1500PFCLCD) connection refused

github.com/networkupstools/nut - darkmattercoder opened this issue 5 months ago

Please document how to run with LIBUSB_DEBUG=x or enable libusb debug output with nut debug options

github.com/networkupstools/nut - tormodvolden opened this issue 5 months ago

All drivers and `nut-scanner` should use `nut_usb_get_string` instead of libusb's `*_simple` and `*_ascii`

github.com/networkupstools/nut - jimklimov opened this issue 5 months ago

USB string langid should be cached somewhere (in `USBDevice_t` or a new `USBHandle_t`?)

github.com/networkupstools/nut - jimklimov opened this issue 5 months ago

Allow configuring fallback and/or preferred langid for USB strings

github.com/networkupstools/nut - jimklimov opened this issue 5 months ago

Service failed to start

github.com/networkupstools/nut - Sssnipercat1 opened this issue 5 months ago

drivers/libusb{0,1}.c: reset driver parameters while enumerating

github.com/networkupstools/nut - tofurky opened this pull request 5 months ago

CI: pass NIT on android

github.com/networkupstools/nut - jimklimov opened this pull request 5 months ago

APC_MODBUS _apc_modbus_read_registers Timeouts

github.com/networkupstools/nut - LucAce opened this issue 5 months ago

Megatec NetAgentA SNMP UPS (Ts Shara 3200VA) invalid ups.status:

github.com/networkupstools/nut - juslex opened this issue 5 months ago

Eaton_broken_strings Fix CI (init value )

github.com/networkupstools/nut - masterwishx opened this pull request 5 months ago

drivers/main.c: do not overwrite set allow_killpower flag with defaults

github.com/networkupstools/nut - desertwitch opened this pull request 5 months ago

ups.conf: allow_killpower flag has no effect

github.com/networkupstools/nut - desertwitch opened this issue 5 months ago

Workaround for broken Eaton (and others?) string language ID descriptor

github.com/networkupstools/nut - tormodvolden opened this pull request 5 months ago

missing input/output voltage variables on APC SMT2200RMI2UC (2U rackmount model)

github.com/networkupstools/nut - olliecook opened this issue 5 months ago

Implement suspend/hibernate handling on Solaris/illumos for `upsmon`

github.com/networkupstools/nut - jimklimov opened this issue 5 months ago

Implement suspend/hibernate handling on Windows for `upsmon`

github.com/networkupstools/nut - jimklimov opened this issue 5 months ago

`upsdrvctl` should warn when used on systemd/SMF capable builds

github.com/networkupstools/nut - jimklimov opened this pull request 5 months ago

UPS equipment offline due to unknown reasons

github.com/networkupstools/nut - comozen opened this issue 5 months ago

Need Help with Windows NUT Server install

github.com/networkupstools/nut - ScottReadTCF opened this issue 5 months ago

Implement (currently systemd) OS sleeping support in `upsmon` client

github.com/networkupstools/nut - jimklimov opened this pull request 5 months ago

Introduce `scripts/systemd/nut-sleep.service` unit

github.com/networkupstools/nut - jimklimov opened this pull request 5 months ago

CI: libgd, ci_build.sh, SYSTEMD_VERSION

github.com/networkupstools/nut - jimklimov opened this pull request 5 months ago

Follow-up for the FUSE PoC: integrate with `make check-NIT` prepared sandboxes

github.com/networkupstools/nut - jimklimov opened this pull request 5 months ago

[HCL] American Power Conservation Back-UPS NS 1350M2 supported by usbhid-ups

github.com/networkupstools/nut - Rdufo opened this issue 5 months ago

Introduce a simple PoC for NUT readings seen in FUSE file system

github.com/networkupstools/nut - jimklimov opened this pull request 5 months ago

RFE: SHM and/or FUSE to access nut-client information

github.com/networkupstools/nut - jimklimov opened this issue 6 months ago

[HCL] TED Electric 3100VA 1800W UPS Line Interactive supported by probably Richcomm

github.com/networkupstools/nut - pr0fetul opened this issue 6 months ago

Fix compilation on newer gcc-13.x and clang-18, fix `nut-scanner` offering config values not applicable for some USB drivers

github.com/networkupstools/nut - jimklimov opened this pull request 6 months ago

CI: `clang-18` complains about a lot of `switch` clauses without a `default` label

github.com/networkupstools/nut - jimklimov opened this issue 6 months ago

Can't power off ups device from Truenas

github.com/networkupstools/nut - LevAnni777 opened this issue 6 months ago

CI: Add embedded build/test cases with buildroot, OpenWRT, etc.

github.com/networkupstools/nut - jimklimov opened this issue 6 months ago

common.c/.h: warning: '%s' directive argument is null [-Wformat-overflow=]

github.com/networkupstools/nut - desertwitch opened this issue 6 months ago

CI: a step towards faster builds: use `libcommon*` as layers or separate flavours, not as independent builds where avoidable

github.com/networkupstools/nut - jimklimov opened this issue 6 months ago

Fix uses of `banner_is_disabled()` to not preclude `-V` printouts; common formation of the banner string; better detection of `time.h` methods

github.com/networkupstools/nut - jimklimov opened this pull request 6 months ago

Warning: excessive poll failures adding APC NMC card

github.com/networkupstools/nut - Karolusin opened this issue 6 months ago

USBHID-UPS Invalid parameter with AMETEK Powervar UPM 2

github.com/networkupstools/nut - dvd604 opened this issue 6 months ago

RICHCOMM_USB >> Fatal error: 'vendorid' is not a valid variable name for this driver.

github.com/networkupstools/nut - Enzisblog opened this issue 6 months ago

[HCL] APC Back-UPS "Essential" BE850G2-FR supported by usbhid-ups

github.com/networkupstools/nut - cornebistouille opened this issue 6 months ago

SMART1000RMXL2U vendor specific instcmd sequence for individual outlet bank control

github.com/networkupstools/nut - ndbrew opened this issue 6 months ago

tools/nut-scanner/scan_usb.c: nutscan_scan_usb(): avoid fatal_with_errno()…

github.com/networkupstools/nut - jimklimov opened this pull request 6 months ago

Thread count in parallel `nut-scanner` should scale down in case of "Too many open files"

github.com/networkupstools/nut - jimklimov opened this issue 6 months ago

Default "scan all" by `nut-scanner` aborts on error of one bus (at least "init libusb") and does not complete other buses

github.com/networkupstools/nut - jimklimov opened this issue 6 months ago

RFE: Extend `upsdrv(svc)ctl` with a `status-all` to check all known NUT-related daemons or service units

github.com/networkupstools/nut - jimklimov opened this issue 6 months ago

Fix uses of `banner_is_disabled()` to not preclude `-V` printouts

github.com/networkupstools/nut - jimklimov opened this issue 6 months ago

Follow-up to `upsdrvctl status` on Windows, add `LOGOUT` to local socket protocol

github.com/networkupstools/nut - jimklimov opened this pull request 6 months ago

`drivers/libusb{0,1}.c`: `{,nut_}libusb_open()`: try to re-fetch `curDevice->Vendor`, `Product`, `Serial` if `NULL`, after claiming it by other criteria

github.com/networkupstools/nut - jimklimov opened this pull request 6 months ago

EATON Ellipse Eco: battery test vs battery charge

github.com/networkupstools/nut - patch-work opened this issue 6 months ago

Switched from blazer_usb to nutdrv_qx - Battery voltage repporting wrong value

github.com/networkupstools/nut - ajcorrea opened this issue 6 months ago

Teach `upsdrvctl` to list device config names and show run-time `status`, and to optionally hide the start-up banner

github.com/networkupstools/nut - jimklimov opened this pull request 6 months ago

`upsdrvctl` would benefit from CLI options to list known devices, and their current health

github.com/networkupstools/nut - jimklimov opened this issue 6 months ago

CI: Ensure that all `addvar()` defined options are reflected in `nutconf` library and tool, maybe augeas lenses, etc.

github.com/networkupstools/nut - jimklimov opened this issue 6 months ago

Address spurious LB+RB log flood on APC BXnnnnMI devices

github.com/networkupstools/nut - jimklimov opened this pull request 6 months ago