Ecosyste.ms: OpenCollective

An open API service for software projects hosted on Open Collective.

ExpressLRS

ExpressLRS aims to provide the best completely open, high refresh radio control link while maintaining a maximum achievable range at that rate with low latency.
Collective - Host: opensource - https://opencollective.com/expresslrs - Website: https://www.expresslrs.org - Code: https://github.com/ExpressLRS

adds 2.4 Nano Ceramic Rx

github.com/ExpressLRS/ExpressLRS-Hardware - dd02efc528f9cfd7b4fffe5a4b8e6c5080c92199 authored almost 4 years ago by Jye <[email protected]>
remove > 10 LQ case (#269)

* Update rx_main.cpp

* Update rx_main.cpp

github.com/ExpressLRS/ExpressLRS - a8442fb0db2addfcc2c306922724d7e39eea99e0 authored almost 4 years ago by AlessandroAU <[email protected]>
UART upload enhancements. (#261)

* UART upload enhancements.

New serial read helper intruduced to help timeout handling.
PySe...

github.com/ExpressLRS/ExpressLRS - 149b8aaffef5d27d3b42c3500df01846328dc691 authored almost 4 years ago by Cru Waller <[email protected]>
Bootloader updated to v0.5.3 (#260)

Bootloader updated to v0.5.3

* GPIO handling enhanced
* UART pinout config per pio env
* 2 ...

github.com/ExpressLRS/ExpressLRS - 4033e29a9e051b1d73865b3b96a17bedbe3b040f authored almost 4 years ago by Cru Waller <[email protected]>
set fanpin define to PB9 (#263)

github.com/ExpressLRS/ExpressLRS - 4d2e5652acfdb23c3afecdbb3482942a1146a67c authored about 4 years ago by mavericm1 <[email protected]>
CCG 2.4 rx readme and gerber changes (#266)

* Update README.md

* Delete gerber_ccg_nano_v0.5_15x9.5-4layerX4PanelReorder.zip

* Add fil...

github.com/ExpressLRS/ExpressLRS - 9a8deb2e3fc840546604b22008dee659685def70 authored about 4 years ago by juhtipuhti <[email protected]>
CCG 2.4 rx readme and gerber changes (#266)

* Update README.md

* Delete gerber_ccg_nano_v0.5_15x9.5-4layerX4PanelReorder.zip

* Add fil...

github.com/ExpressLRS/ExpressLRS-Hardware - a6daf308d47f7101dac0e812e406abf55df21045 authored about 4 years ago by juhtipuhti <[email protected]>
Merge branch 'master-dev' of https://github.com/AlessandroAU/ExpressLRS into master-dev

github.com/ExpressLRS/ExpressLRS - ae70e2480da0ddd4ca6c73af79edd281bffb708e authored about 4 years ago by Alessandro <[email protected]>
fix platform names

github.com/ExpressLRS/ExpressLRS - d483e02e1db79bd5764ec95d1b10497c5ee0f4e7 authored about 4 years ago by Alessandro <[email protected]>
Custom opentx build for T18 (#264)

resolves #258

github.com/ExpressLRS/ExpressLRS - 3f78d1a038df0150b7ec5ef03db8e1c1d3a044f0 authored about 4 years ago by Cru Waller <[email protected]>
BUZZER redefine (#262)

remove redefine buzzer pin(PB1)

github.com/ExpressLRS/ExpressLRS - 0e8fac86ec5a88eaf690ab8b3bf80e08b310013a authored about 4 years ago by githubDLG <[email protected]>
Merge branch 'master-dev' of https://github.com/AlessandroAU/ExpressLRS into master-dev

github.com/ExpressLRS/ExpressLRS - 2c4f3819a97348a98563a862df9f8a24b5a7fc2b authored about 4 years ago by Alessandro <[email protected]>
use default sync word for now until we figure out sx1276

github.com/ExpressLRS/ExpressLRS - 9eaea34361be1c4b86882b151a439ccaed664c87 authored about 4 years ago by Alessandro <[email protected]>
Feature/r900mini rx (#219)

* pinout sounds with multimeter

* add platformio build for r900mini rx

* added r900mini pi...

github.com/ExpressLRS/ExpressLRS - a1a3bec66ab9a86c0049d0aa292f97f72293f4aa authored about 4 years ago by Dimitar Dimitrov <[email protected]>
Feature/r900mini rx (#219)

* pinout sounds with multimeter

* add platformio build for r900mini rx

* added r900mini pi...

github.com/ExpressLRS/ExpressLRS-Hardware - 4730bb1d5374940433f03364e4a41d02bd87533b authored about 4 years ago by Dimitar Dimitrov <[email protected]>
Feature/r900mini rx (#219)

* pinout sounds with multimeter

* add platformio build for r900mini rx

* added r900mini pi...

github.com/ExpressLRS/ExpressLRS-Hardware - cb9ec20d72cc325620863e5fe368d0c800221814 authored about 4 years ago by Dimitar Dimitrov <[email protected]>
Refactored uart upload script + print version (#257)

github.com/ExpressLRS/ExpressLRS - dbb1a24c1a9b5e32d995bed990f9af48518adf63 authored about 4 years ago by Rejd <[email protected]>
Add info that 10k Resistors are not required (#250)

* Add info that 10k Resistors are not required

* Improve formatting and add note about PCB an...

github.com/ExpressLRS/ExpressLRS - 692c24c929e2ba66e75ccd6b6c8c18162c15cc37 authored about 4 years ago by Jonathan <[email protected]>
Add info that 10k Resistors are not required (#250)

* Add info that 10k Resistors are not required

* Improve formatting and add note about PCB an...

github.com/ExpressLRS/ExpressLRS-Hardware - 2c4282ccdb8ff6e86f3324f316a7fa9b8de8cfcb authored about 4 years ago by Jonathan <[email protected]>
Added r9m lite target via stock bl (#256)

* Added r9m lite target via stock bl

* adjusted github workflow to build new target

github.com/ExpressLRS/ExpressLRS - d1753eb580268a7075078092db9dd0d609b3a867 authored about 4 years ago by Rejd <[email protected]>
fixing range(3) -> range(6) for reading bootloader (#255)

* fixed serial list nonetype

* fixed seriallist nonetype and added sleep for older bootloader...

github.com/ExpressLRS/ExpressLRS - c14b6c962df6b344dc8897809c765dfdf136a264 authored about 4 years ago by mavericm1 <[email protected]>
fixed serial list nonetype (#254)

* fixed serial list nonetype

* fixed seriallist nonetype and added sleep for older bootloader...

github.com/ExpressLRS/ExpressLRS - d611f0b88e81465733da8ae32e4344be2f25414c authored about 4 years ago by mavericm1 <[email protected]>
reverse serial list to have best chance of hitting correct serial port (#253)

github.com/ExpressLRS/ExpressLRS - 473bed0e1bcc2900461b6cc7d08f7ee4c566862b authored about 4 years ago by mavericm1 <[email protected]>
Fix typo (#251)

* Fix typo

github.com/ExpressLRS/ExpressLRS - d1ec4c44bc8e740f8ab69ce4326df164045bff07 authored about 4 years ago by Jonathan <[email protected]>
bugfix - additional null checks (#249)

github.com/ExpressLRS/ExpressLRS - ca57901eb13a48ade3c1319920a8edcd9f52dfec authored about 4 years ago by Rejd <[email protected]>
r9m fan cover updated (#248)

new images & pcb standoffs added

Co-authored-by: Niklas Voigt <[email protected]>

github.com/ExpressLRS/ExpressLRS - 8118bbc141e01b51718c0c7cdfa440d5b75355dd authored about 4 years ago by NiklasVoigt <[email protected]>
r9m fan cover updated (#248)

new images & pcb standoffs added

Co-authored-by: Niklas Voigt <[email protected]>

github.com/ExpressLRS/ExpressLRS-Hardware - 990a9080318f28f64a9443f1723d4b25a1465376 authored about 4 years ago by NiklasVoigt <[email protected]>
r9m fan cover updated (#248)

new images & pcb standoffs added

Co-authored-by: Niklas Voigt <[email protected]>

github.com/ExpressLRS/ExpressLRS-Hardware - 498fe731a1c716e7e493c436522f5cef5dc358ab authored about 4 years ago by NiklasVoigt <[email protected]>
Fix mystery white space char (#247)

github.com/ExpressLRS/ExpressLRS - a2d431d7b25578b35af8c36bb25ed6414c0adfed authored about 4 years ago by Cru Waller <[email protected]>
Scripts: upload enhancemnets (#246)

* Serial find is trying to search FC prio to all available serials
* UTF-8 encoding to passthro...

github.com/ExpressLRS/ExpressLRS - a6c7f3cbe88c96ebe95edaf8356f7cd9abbf052f authored about 4 years ago by Cru Waller <[email protected]>
Bootloader sources updated (#245)

* bootloader: Drivers folder removed

* Bootloader: updated to v0.5.1

github.com/ExpressLRS/ExpressLRS - 8446f25b195e20986b2e5fef01daaf372658d41e authored about 4 years ago by Cru Waller <[email protected]>
remove *10 for SNR

github.com/ExpressLRS/ExpressLRS - c85bc1d4600476b8137d1745b0fd18503bc4e1f4 authored about 4 years ago by Alessandro <[email protected]>
prevent connection when switch encoding mode differs between RX/TX

github.com/ExpressLRS/ExpressLRS - 9b9300787790155e90c164b8897a8c77328b4344 authored about 4 years ago by Alessandro <[email protected]>
remove 10x factor for SNR (fixes inav snr alarm)

github.com/ExpressLRS/ExpressLRS - 63aea892a1fcb285ef2408fc288fdcc48bd9e4d1 authored about 4 years ago by Alessandro <[email protected]>
Target: Support for DIY SX1280 CCG Nano v0.5 (#244)

* Feature: New DIY 2.4GHz Nano RX added

Added support for SX1280 based receiver called
DIY 2...

github.com/ExpressLRS/ExpressLRS - 4f485df9ca10111ca570f0fd94a8b97f87ec91f1 authored about 4 years ago by Cru Waller <[email protected]>
Target: Support for DIY SX1280 CCG Nano v0.5 (#244)

* Feature: New DIY 2.4GHz Nano RX added

Added support for SX1280 based receiver called
DIY 2...

github.com/ExpressLRS/ExpressLRS-Hardware - 6c72080dd65313a5275957cf67b084ad8b78881e authored about 4 years ago by Cru Waller <[email protected]>
Faster inital sync (#243)

* init

* test with stm32 targets

* esp32 tweaks

* Update user_defines.txt

* Update u...

github.com/ExpressLRS/ExpressLRS - c5a9de537e59a6b62326dc524f1beb7eba169de7 authored about 4 years ago by AlessandroAU <[email protected]>
Update README.md

github.com/ExpressLRS/ExpressLRS - 56b62d2e049db1be336a1e22cdc96e71a6fd63d3 authored about 4 years ago by AlessandroAU <[email protected]>
fan enable pin

github.com/ExpressLRS/ExpressLRS - 9820267c3779e65662fd39fcc260654b66951222 authored about 4 years ago by Alessandro <[email protected]>
Tweaks to ESP32 Targets (improved/faster hwtimer switching rates) (#241)

* init

* test with stm32 targets

* esp32 tweaks

* Update user_defines.txt

* Update t...

github.com/ExpressLRS/ExpressLRS - 2abd89bcbe736d6973bbd33aa2f4984629d1d379 authored about 4 years ago by AlessandroAU <[email protected]>
Enhanced UART xmodem protocol starting (#242)

* Fixed issue where script was able to stall in readline()
* 'CC' increased to 'CCC' for stability

github.com/ExpressLRS/ExpressLRS - a5000dfaf3963b60b9e671f62091686bc5cbefbe authored about 4 years ago by Cru Waller <[email protected]>
Merge branch 'master-dev' of https://github.com/AlessandroAU/ExpressLRS into master-dev

github.com/ExpressLRS/ExpressLRS - 5870b1ee0caf1aa69abe3d430774d7bdec83a539 authored about 4 years ago by Alessandro <[email protected]>
espbackpack tweaks

github.com/ExpressLRS/ExpressLRS - db1e5f38b64c4bb24559a3f9a7de4ae77a4cd7ff authored about 4 years ago by Alessandro <[email protected]>
R9MX bootloader fix (v0.5.1) (#240)

github.com/ExpressLRS/ExpressLRS - 3f48958fe0314191928ecdc2e01134e062e1c757 authored about 4 years ago by Cru Waller <[email protected]>
Merge branch 'master-dev' of https://github.com/AlessandroAU/ExpressLRS into master-dev

github.com/ExpressLRS/ExpressLRS - 0f9c48690bf058e3feca3ccd2c76ecef975820c5 authored about 4 years ago by Alessandro <[email protected]>
fix issue with .elf being used instead of .bin for building

github.com/ExpressLRS/ExpressLRS - d7292b10173769d78c6e6026dd7d59e11660598b authored about 4 years ago by Alessandro <[email protected]>
Organise PCB folder. (#230)

* moved PCB folders/files

github.com/ExpressLRS/ExpressLRS - 146caa50a94da4836108193e64702fa6255cdd23 authored about 4 years ago by AlessandroAU <[email protected]>
Organise PCB folder. (#230)

* moved PCB folders/files

github.com/ExpressLRS/ExpressLRS-Hardware - 8c5c7b320f23533f285a0052921b6d61d08a3f32 authored about 4 years ago by AlessandroAU <[email protected]>
Upload method enhancements (#238)

* Upload scripts updated to support custom port and speed values

* small cleanups

* pio in...

github.com/ExpressLRS/ExpressLRS - b16a23b9b91929ebf7b893e8acc8c41c9c646ba8 authored about 4 years ago by Cru Waller <[email protected]>
Constrain scaled RSSI between -100 to -50 (#237)

* Constrain scaled RSSI between -100 to -50

* Change bottom range of RSSI scaling to use expe...

github.com/ExpressLRS/ExpressLRS - 67a26d0cfd2ca9d1f1112a0858360b3cd64c701c authored about 4 years ago by wvarty <[email protected]>
add UART disconnect tones

github.com/ExpressLRS/ExpressLRS - c193887d0f1e7a165dd92dd8b05133b182c71cc5 authored about 4 years ago by Alessandro <[email protected]>
bootloaders updated to version 0.5 (#234)

github.com/ExpressLRS/ExpressLRS - 31f4e5026c1d37bd212aba3183a29b21e894846b authored about 4 years ago by Cru Waller <[email protected]>
New target for R9SLIM+ OTA (#233)

* R9SLIM+ STLINK target

* R9SLIM+ OTA targets

github.com/ExpressLRS/ExpressLRS - a978dcfb5514dc7fcc4ae9b11736cf6045d29f84 authored about 4 years ago by Cru Waller <[email protected]>
fix ifdef

github.com/ExpressLRS/ExpressLRS - 849ab26c62b8d20893b51ad94ea024b5d33f1809 authored about 4 years ago by Alessandro <[email protected]>
remove unnecessary memcpy and fix timeout detect bug

github.com/ExpressLRS/ExpressLRS - 78c1b41a861c0f5ca92e136a7caf4cafdc515d41 authored about 4 years ago by Alessandro <[email protected]>
User-definable startup melody (#227)

* Added user-definable startup melody

* conditional include of pitches.h

* pitched FF7 fan...

github.com/ExpressLRS/ExpressLRS - 1968e05d1eaacfad7311c625774b43f59ef5f4ae authored about 4 years ago by Rejd <[email protected]>
Update README.md

github.com/ExpressLRS/ExpressLRS - 5fff9c85f16ddcf3a3481a9a7aa31cac0312ebe2 authored about 4 years ago by AlessandroAU <[email protected]>
fix 2

github.com/ExpressLRS/ExpressLRS - f52839069d8078338b05a2daf1c1ec3656e560f5 authored about 4 years ago by Alessandro <[email protected]>
fix build

github.com/ExpressLRS/ExpressLRS - fb34b07fc3a721619541f5dfab4cc85d068a84f0 authored about 4 years ago by Alessandro <[email protected]>
Update R9M Lite Pro Targets.h (#228)

* BF passthrough upload tweaks and updated xmodem file to latest version

* r9mm bootloaders u...

github.com/ExpressLRS/ExpressLRS - 124ecf0c1199236f0894c64e96f01234e893ae09 authored about 4 years ago by Jahnkeanater <[email protected]>
Adds ghost atto as target (#194)

* BF passthrough upload tweaks and updated xmodem file to latest version

* r9mm bootloaders u...

github.com/ExpressLRS/ExpressLRS - 30e84c4c50630bb2ad0b0e994c6fee5bcc4e39db authored about 4 years ago by AlessandroAU <[email protected]>
Adds ghost atto as target (#194)

* BF passthrough upload tweaks and updated xmodem file to latest version

* r9mm bootloaders u...

github.com/ExpressLRS/ExpressLRS-Hardware - 8892d01a3cd73dce29c772c24983f7452a4e06cd authored about 4 years ago by AlessandroAU <[email protected]>
Adds ghost atto as target (#194)

* BF passthrough upload tweaks and updated xmodem file to latest version

* r9mm bootloaders u...

github.com/ExpressLRS/ExpressLRS-Hardware - 316cab089a047b2a772c76f85188e79075c21c31 authored about 4 years ago by AlessandroAU <[email protected]>
add link in user_defines to fan mod page

github.com/ExpressLRS/ExpressLRS - dcb0f62a65800a3a6ebcf063d0001e6f9d53886a authored about 4 years ago by AlessandroAU <[email protected]>
Merge branch 'master-dev' of https://github.com/AlessandroAU/ExpressLRS into master-dev

github.com/ExpressLRS/ExpressLRS - 30f19ca568038e1b6978fee43455d89a65fcfac3 authored about 4 years ago by Alessandro <[email protected]>
disable old button code (not used)

github.com/ExpressLRS/ExpressLRS - 4a499e094d17e07865251b81be06d190fe6bc2ee authored about 4 years ago by Alessandro <[email protected]>
R9M Fan-Case added (#226)

* R9M Fan-Case added

* change directory

Co-authored-by: Niklas Voigt <niklasvoigt1997@gmai...

github.com/ExpressLRS/ExpressLRS - 33b7299ebc7b318cf8d5f8746f74b008ed76c71e authored about 4 years ago by NiklasVoigt <[email protected]>
R9M Fan-Case added (#226)

* R9M Fan-Case added

* change directory

Co-authored-by: Niklas Voigt <niklasvoigt1997@gmai...

github.com/ExpressLRS/ExpressLRS-Hardware - a69539889915888ac0964c15f9180deb9c315f34 authored about 4 years ago by NiklasVoigt <[email protected]>
R9M Fan-Case added (#226)

* R9M Fan-Case added

* change directory

Co-authored-by: Niklas Voigt <niklasvoigt1997@gmai...

github.com/ExpressLRS/ExpressLRS-Hardware - b39598b68e0769e7ed3d8bd26a908f5f8d7a2d0b authored about 4 years ago by NiklasVoigt <[email protected]>
add jingle to R9M when uart connects

github.com/ExpressLRS/ExpressLRS - 96f4c32689b20190ec3845550d6aec692497fa58 authored about 4 years ago by Alessandro <[email protected]>
index page rework using new designs added (#224)

github.com/ExpressLRS/ExpressLRS - 2fbf51a8c7748e5aeff4a7b7e66920f6353405d6 authored about 4 years ago by Dimitar Dimitrov <[email protected]>
fix uart upload/reboot bug on stm32 (r9mm etc)

github.com/ExpressLRS/ExpressLRS - 43d3b1ec7ab7b3c30757884ba2f80091f14a8d9a authored about 4 years ago by Alessandro <[email protected]>
Add note about slightly larger XO (#225)

The XO in the BOM is out of stock everywhere so added a link to the slightly larger version, whi...

github.com/ExpressLRS/ExpressLRS - a371d6750649293d48d983da5e0e1eaff64bebee authored about 4 years ago by SpencerGraffunder <[email protected]>
Add note about slightly larger XO (#225)

The XO in the BOM is out of stock everywhere so added a link to the slightly larger version, whi...

github.com/ExpressLRS/ExpressLRS-Hardware - 5424f3543e26a1681a6940de8eb3c06b19a9bd15 authored about 4 years ago by SpencerGraffunder <[email protected]>
Update README.md

github.com/ExpressLRS/ExpressLRS - 5aba3c575f05946ae8f23b0fe0449d616ba99ca8 authored about 4 years ago by AlessandroAU <[email protected]>
fix mistake...

github.com/ExpressLRS/ExpressLRS - 34a54686b4b63a7760c51e37e269fb6f88d5c839 authored about 4 years ago by AlessandroAU <[email protected]>
Update user_defines.txt

github.com/ExpressLRS/ExpressLRS - 3aa7eda1e800fbc296497cdaa91259135999d1f2 authored about 4 years ago by AlessandroAU <[email protected]>
Update user_defines.txt

github.com/ExpressLRS/ExpressLRS - 0ce1811417b8f6149167546be9dcd69a6f135420 authored about 4 years ago by AlessandroAU <[email protected]>
Limits R9M output power to 250mw by default

github.com/ExpressLRS/ExpressLRS - d7e0e0dcd2720c064bdbc6ecc51bba5f63697ecc authored about 4 years ago by AlessandroAU <[email protected]>
Create git_path_option.png

github.com/ExpressLRS/ExpressLRS - 918c269682be9297cf37e39c5497588ddf258763 authored about 4 years ago by Alessandro <[email protected]>
Create git_path_option.png

github.com/ExpressLRS/ExpressLRS-Hardware - 69716322c62dd4ac7bc636457d891371022dd8c6 authored about 4 years ago by Alessandro <[email protected]>
Create git_path_option.png

github.com/ExpressLRS/ExpressLRS-Hardware - 389f12bab1b559171f4cfeb21275c2f98cddc670 authored about 4 years ago by Alessandro <[email protected]>
Delete old unused file

github.com/ExpressLRS/ExpressLRS - 51edcef15fea438d1612bacb5315387548e231a4 authored about 4 years ago by Alessandro <[email protected]>
Update ELRS.lua

fixes tango2

github.com/ExpressLRS/ExpressLRS - d89b5095efda46081b0380fbd520458c9578f84d authored about 4 years ago by AlessandroAU <[email protected]>
Fix timing check on Link rate changes to try and prevent hangs. (#220)

github.com/ExpressLRS/ExpressLRS - 193c98b80ff1d08fb6c8c820072fe89b8746d83d authored about 4 years ago by Kit Adams <[email protected]>
Improve reliability of air-rate changes (#221)

* Fix issue where every second "Change link rate" command had no effect.

* Fix timing check o...

github.com/ExpressLRS/ExpressLRS - 30bea3137d837b47ff4583097458988f10e92cf2 authored about 4 years ago by Kit Adams <[email protected]>
Some new images & readme updates (#216)

* Update Average Total Latency.png

* Update README.md

relative img path

* Create faq.pn...

github.com/ExpressLRS/ExpressLRS - 949da31d321f8ab7314502e650d254175ed2f62b authored about 4 years ago by NiklasVoigt <[email protected]>
Some new images & readme updates (#216)

* Update Average Total Latency.png

* Update README.md

relative img path

* Create faq.pn...

github.com/ExpressLRS/ExpressLRS-Hardware - aab1e8681e3fbb9f09d3e7811097cb6b3c67e731 authored about 4 years ago by NiklasVoigt <[email protected]>
Some new images & readme updates (#216)

* Update Average Total Latency.png

* Update README.md

relative img path

* Create faq.pn...

github.com/ExpressLRS/ExpressLRS-Hardware - 22a2b5d9a8209a0bf98d6df0e674c5628d52a56e authored about 4 years ago by NiklasVoigt <[email protected]>
Some graphical stuff added (#215)

* adds images and stickers

Co-authored-by: Niklas Voigt <[email protected]>

github.com/ExpressLRS/ExpressLRS-Hardware - dc4123f2c1df556e0f7ef4b35665d5ef9cc8a60a authored about 4 years ago by NiklasVoigt <[email protected]>
Some graphical stuff added (#215)

* adds images and stickers

Co-authored-by: Niklas Voigt <[email protected]>

github.com/ExpressLRS/ExpressLRS-Hardware - da70216e934799098aa6f6fc5b4084c022888919 authored about 4 years ago by NiklasVoigt <[email protected]>
Some graphical stuff added (#215)

* adds images and stickers

Co-authored-by: Niklas Voigt <[email protected]>

github.com/ExpressLRS/ExpressLRS - b7838197f3816ef4a720678a8f10825dac9a3aed authored about 4 years ago by NiklasVoigt <[email protected]>
crc lib plus 0x83 poly for ota crc (#210)

* crc lib plus 0x83 poly for ota crc

* new lua based on PeHo's version (#161)

* new lua ba...

github.com/ExpressLRS/ExpressLRS - 09ea772e165b4f8095256ef6cdff1450cad42fa4 authored about 4 years ago by AlessandroAU <[email protected]>
Fix R9 RX monitor_speed (#213)

github.com/ExpressLRS/ExpressLRS - 2eb2d9d643045e884514374ba93910c1a3bcca09 authored about 4 years ago by Cru Waller <[email protected]>
Add R9SLIM+ target (#209)

* Start working on R9SLIM+ variant

* R9SLIM dual uart support

* R9SLIM+ antenna switch ini...

github.com/ExpressLRS/ExpressLRS - bef20aca72cb92718971413ae0f51f3022a097be authored about 4 years ago by Cru Waller <[email protected]>
R9MX receiver MCU type fixes (#211)

Fixed:
- MCU type
- MCU frequency
- RAM size
- Flash offset handling...

github.com/ExpressLRS/ExpressLRS - 0302e9a4aebb72d30e8356f4b408a6e307fcf8ba authored about 4 years ago by Cru Waller <[email protected]>
reduce build targets (#207)

Co-authored-by: Jye <[email protected]>

github.com/ExpressLRS/ExpressLRS - 50fb865f2556c04f1738c7e356b83f56ca13dd79 authored about 4 years ago by Jye <[email protected]>
new lua based on PeHo's version (#161)

* new lua based on PeHo's version

* Update CRSF.cpp

* fix merge error

* new lua based o...

github.com/ExpressLRS/ExpressLRS - 1be64789d6d9b2202b56724358bc64eba41d14c4 authored about 4 years ago by AlessandroAU <[email protected]>
minor code cleanup

github.com/ExpressLRS/ExpressLRS - 471c27faafdf49edf79abf2ce803c9456cded8a8 authored about 4 years ago by AlessandroAU <[email protected]>
Update LowPassFilter.h

LPF is called from ISR and should have ICACHE_RAM_ATTR

github.com/ExpressLRS/ExpressLRS - d284346b2fe272bf64040523af05b6a71c078577 authored about 4 years ago by AlessandroAU <[email protected]>